Repeat Causing Generic Models to Flip

[J_Rains]

Hello,

I am attempting to create a family for Amphenol's Cable Link system. While using the repeat function in an adaptive family, the models begin to flip by 180 degrees. I have tried every setting for the "Orients to" parameter belonging to the adaptive points in the nested families, however nothing changes. The model is a bit crude, but this is preliminary. Any suggestions?

[rosie_lucas1]

Hi @J_Rains,

I wanted to check in and see if you still needed assistance, or if you found a solution to your question already? Let us know if you need further assistance by providing an update or if you have found a solution, please share it with the community so other members who may have the same question could learn from your experience.

All the best,

Rosie | Community Manager

[J_Rains]

Hi, I have not yet found a solution. Thanks for checking in.

[jay_colc]

Hi have you explored the options for the Node Alignments and possibly using Host driven options?

[J_Rains]

Thank you for asking, yes I have tried every option for the node alignment to no avail unfortunately.

[jay_colc]

Is the Orientation in the imported Family conflicting with the Adaptive Line Family?

I found this which may offer some guindance?

Solved: Repeated Adaptive Component Orientation - Autodesk Community