solve duplicate mark warning

[Zaatra]

HI EVERY ONE, HOW I CAN SOLVE THE DUPLICATE MARK WARNINIG ?

[Zaatra]

HI EVERY ONE, HOW I CAN SOLVE THE DUPLICATE MARK WARNINIG ?

[Anonymous · Accepted solution]

Under the manage tab, you see the Inquiry panel. There is a button named Warnings.

By clicking on that you are ableto see all the warnings. You will see a warning named: Elements have duplicate 'Mark" values. You can filter all the elements that have duplicate values and renumber the marks in the properties.

Another way would be to write a script in Dynamo that checks elements for duplicate values and renames them according to a certain predefined value.

[Anonymous · Accepted solution]

Under the manage tab, you see the Inquiry panel. There is a button named Warnings.

By clicking on that you are ableto see all the warnings. You will see a warning named: Elements have duplicate 'Mark" values. You can filter all the elements that have duplicate values and renumber the marks in the properties.

Another way would be to write a script in Dynamo that checks elements for duplicate values and renames them according to a certain predefined value.

[ToanDN · Accepted solution]

You can create a schedule of the category, add Mark field to see the duplicates and renumber them.

[ToanDN · Accepted solution]

You can create a schedule of the category, add Mark field to see the duplicates and renumber them.

[RobDraw]

IMHO, there is no reason to resolve it. It's just an arbitrary number and duplicates can be ignored without any detrimental affects on the model.

[RobDraw]

IMHO, there is no reason to resolve it. It's just an arbitrary number and duplicates can be ignored without any detrimental affects on the model.

[Zaatra]

thank you for answer, but i have 800 warning , i install free trial element renumber but this software can only renumber the wire and cable tray

for daynmo can you give my matirial or video to learn it please?

[Zaatra]

thank you for answer, but i have 800 warning , i install free trial element renumber but this software can only renumber the wire and cable tray

for daynmo can you give my matirial or video to learn it please?

[Zaatra]

thank you this solution is aplicable to me in another project but this project have 800 warning

[Zaatra]

thank you this solution is aplicable to me in another project but this project have 800 warning

[Zaatra]

i know that but sometimes it effect the speed of rendering of project

[Zaatra]

i know that but sometimes it effect the speed of rendering of project

[ToanDN · Accepted solution]

If you really don't need the Mark value and only need to get rid of the warnings then group the schedule by Mark, unitemized, type a number in the cell then delete it. That will clear all the Mark value and in turn, clear tge warnings.

[ToanDN · Accepted solution]

If you really don't need the Mark value and only need to get rid of the warnings then group the schedule by Mark, unitemized, type a number in the cell then delete it. That will clear all the Mark value and in turn, clear tge warnings.

[Anonymous]

This is a simple dynamo script that rewrites the Mark parameter with the Element ID for all elements visible in the active view. It's a custom node from the Bakery package. You can find a lot of information about Dynamo on Youtube. I suggest installing the Bakery package as well, as this will add a lot of functionality to Dynamo.

Hope this helps you out. If not, let me know and I'll see if I can help you out.

[Anonymous]

This is a simple dynamo script that rewrites the Mark parameter with the Element ID for all elements visible in the active view. It's a custom node from the Bakery package. You can find a lot of information about Dynamo on Youtube. I suggest installing the Bakery package as well, as this will add a lot of functionality to Dynamo.

Hope this helps you out. If not, let me know and I'll see if I can help you out.

[fabiosato]

Hello,

In Revit 2018, in the Dynamo player I have seen a free routine to do this.

[fabiosato]

Hello,

In Revit 2018, in the Dynamo player I have seen a free routine to do this.

[Anonymous]

I am trying to get this duplicate mark warning message because I don't want the structural framings to have the same Mark value in it's instance parameters. Each Mark has to be unique. I tested in a revit architectural sample project and made a schedule with 2 fields (Family and Mark). Then I set the Mark for 1 beam at 100 and the other also 100, but I don't get the warning message...

Do you have an idea how to display this message?

[Anonymous]

I am trying to get this duplicate mark warning message because I don't want the structural framings to have the same Mark value in it's instance parameters. Each Mark has to be unique. I tested in a revit architectural sample project and made a schedule with 2 fields (Family and Mark). Then I set the Mark for 1 beam at 100 and the other also 100, but I don't get the warning message...

Do you have an idea how to display this message?

[Anonymous]

I am trying to get this duplicate mark warning message because I don't want the structural framings to have the same Mark value in it's instance parameters. Each Mark has to be unique. I tested in a revit architectural sample project and made a schedule with 2 fields (Family and Mark). Then I set the Mark for 1 beam at 100 and the other also 100, but I don't get the warning message...

Do you have an idea how to display this message?

[Anonymous]

I am trying to get this duplicate mark warning message because I don't want the structural framings to have the same Mark value in it's instance parameters. Each Mark has to be unique. I tested in a revit architectural sample project and made a schedule with 2 fields (Family and Mark). Then I set the Mark for 1 beam at 100 and the other also 100, but I don't get the warning message...

Do you have an idea how to display this message?

[Anonymous]

Hello Toad, 

Could you upload a little screencast or a screenshot of this. Since I can not  do it by your text instruction. Once I do have all my doors with mark, I do select all but by the time I try to set 1 number, they do not change, 


Thanks in advance.

[Anonymous]

Hello Toad, 

Could you upload a little screencast or a screenshot of this. Since I can not  do it by your text instruction. Once I do have all my doors with mark, I do select all but by the time I try to set 1 number, they do not change, 


Thanks in advance.

[asWAPL9]

I am having a weird bug. I get the duplicate type mark value warning, however my elements are not duplicates!!! it keeps on happening it is very annoying. how can this be?

[asWAPL9]

I am having a weird bug. I get the duplicate type mark value warning, however my elements are not duplicates!!! it keeps on happening it is very annoying. how can this be?

[iainsavage]

You’ve probably got two types in a family, both with the same Type Mark.

As one if the solutions above create a schedule withType and  Type Mark as fields, sort by Type Mark then by Type and you’ll see the duplicates.

[iainsavage]

You’ve probably got two types in a family, both with the same Type Mark.

As one if the solutions above create a schedule withType and  Type Mark as fields, sort by Type Mark then by Type and you’ll see the duplicates.

[iainsavage]

PS: extremely unlikely that this is a “bug”.

[iainsavage]

PS: extremely unlikely that this is a “bug”.

[asWAPL9]

two types, type 1 vs type 2. type 1 HAD value "x1" in the type mark parameter, but no longer. now it has "x2"
Type 2 has value "x1" in the type mark parameter.
warning appears as soon as i write that "x1" -duplicate type marks.

been working with this software since 2012, pretty sure its either a bug, or a software error.

[asWAPL9]

two types, type 1 vs type 2. type 1 HAD value "x1" in the type mark parameter, but no longer. now it has "x2"
Type 2 has value "x1" in the type mark parameter.
warning appears as soon as i write that "x1" -duplicate type marks.

been working with this software since 2012, pretty sure its either a bug, or a software error.

[RobDraw]

---

@asWAPL9 wrote:
been working with this software since 2012, pretty sure its either a bug, or a software error.

---

Share the file for verification.

[RobDraw]

---

@asWAPL9 wrote:
been working with this software since 2012, pretty sure its either a bug, or a software error.

---

Share the file for verification.

[iainsavage]

---

@asWAPL9 wrote:
been working with this software since 2012, pretty sure its either a bug, or a software error.

---

I did a Google search and couldn’t get any hits for any similar posts so maybe its rare or unique to your system. Maybe you should raise a support case with Autodesk.

Have you been getting this same error since 2012 or is it something which just recently appeared?

[iainsavage]

---

@asWAPL9 wrote:
been working with this software since 2012, pretty sure its either a bug, or a software error.

---

I did a Google search and couldn’t get any hits for any similar posts so maybe its rare or unique to your system. Maybe you should raise a support case with Autodesk.

Have you been getting this same error since 2012 or is it something which just recently appeared?

[asWAPL9]

Unfortunately I cannot because of confidentiality reasons. will try to replicate it in a test project.

[asWAPL9]

Unfortunately I cannot because of confidentiality reasons. will try to replicate it in a test project.