How to give same electrical phase for the circuits in same space?

[Anonymous]

As per the regulation here, no two phases are allowed in one room in villas. I have a bed room with two lighting circuits and one power circuits. Please help me to put everything in one phase, say R phase. Revit automatically assigns to other phases.

[piotr.bocian · Accepted solution]

You can rearrange circuits on panel schedule:

http://help.autodesk.com/view/RVT/2019/ENU/?guid=GUID-3F5CF335-1F1F-46D3-A781-3FE0B6209E57

[Anonymous]

Thanks for your quick response.
Yes. Thats possible.But the tag i added to lighting layout doesn't get
updated when i change the phase in panel schedule. For example, i shifted
Y2 circuit to R3 in the panel schedule. But still the wire tag in the
lighting layout show Y2, which is not acceptable. Please help..

[Anonymous]

Thanks for your quick response. 

Yes. Thats possible.But the tag i added to lighting layout doesn't get updated when i change the phase in panel schedule. For example, i shifted Y2 circuit to R3 in the panel schedule. But still the wire tag in the lighting layout show Y2, which is not acceptable. Please help..

[piotr.bocian · Accepted solution]

To which parameter of wire property the wire tag is associated to? You are not able to do it automatically, because phase is not a parameter of wire.

[Anonymous]

Thank you all. It was a temporary issue. Once i closed and re-opened, its working fine. Thank you very much to all.