Revit MEP Forum
Welcome to Autodesk’s Revit MEP Forums. Share your knowledge, ask questions, and explore popular Revit MEP topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to give same electrical phase for the circuits in same space?

5 REPLIES 5
SOLVED
Reply
Message 1 of 6
Anonymous
944 Views, 5 Replies

How to give same electrical phase for the circuits in same space?

As per the regulation here, no two phases are allowed in one room in villas. I have a bed room with two lighting circuits and one power circuits. Please help me to put everything in one phase, say R phase. Revit automatically assigns to other phases.

5 REPLIES 5
Message 2 of 6
piotr.bocian
in reply to: Anonymous

Message 3 of 6
Anonymous
in reply to: piotr.bocian

Thanks for your quick response.
Yes. Thats possible.But the tag i added to lighting layout doesn't get
updated when i change the phase in panel schedule. For example, i shifted
Y2 circuit to R3 in the panel schedule. But still the wire tag in the
lighting layout show Y2, which is not acceptable. Please help..
Message 4 of 6
Anonymous
in reply to: piotr.bocian

Thanks for your quick response. 
Yes. Thats possible.But the tag i added to lighting layout doesn't get updated when i change the phase in panel schedule. For example, i shifted Y2 circuit to R3 in the panel schedule. But still the wire tag in the lighting layout show Y2, which is not acceptable. Please help..
Message 5 of 6
piotr.bocian
in reply to: Anonymous

To which parameter of wire property the wire tag is associated to? You are not able to do it automatically, because phase is not a parameter of wire.

Message 6 of 6
Anonymous
in reply to: piotr.bocian

Thank you all. It was a temporary issue. Once i closed and re-opened, its working fine. Thank you very much to all.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report