Walls and roofs - some randomly displaying different material colour

[richH5Z5C]

Can anyone help me figure out why in the screenshot below some wall edges/faces are showing red or grey or even brown - they are all the identical wall type and all external facing. The same with some of the roofs - how can I set roof edges to be something other than grey and why is one of the flat roofs of the dormers randomly red top surface and a red edge?

I'm drawing up structural SIPs package so I don't want to set any of the layers to wrap.

2023-04-04 17_35_22-Autodesk Revit 2023.1 - [57 - 76 Lagland Street v1 - 3D View_ {3D}].jpg

[hmunsell]

In your wall settings is the Wrapping at Ends set?

hmunsell_0-1680627359426.png

[ToanDN · Accepted solution]

Paint the edges.

[richH5Z5C]

They are set to "none" which is how I have to have them as I'm drawing the SIP walls which consist of 11mm OSB | 150mm EPS | 11mm OSB and the OSB does not wrap at the ends - as I'm working on structural production drawings I can't use wrapping for the "look" as it will cause my framing plugin to not work when framing the SIPs

[richH5Z5C]

This is the solution! Thanks - I'm working off the architect's original model and they must have applied some paint settings! (Did not know about the paint function before!)