wall split horizontally, still connected between them

[xu.teng]

When i am trying to move one of the wall, the other one follows. how can i break this connectiong?

https://forums.autodesk.com/t5/revit-architecture-forum/wall-split-how-to-separate-resulting-element...

i found a old post about the same problem, but i cannot use tab to find the slit line. can someone help?

[ToanDN]

---

@xu.teng wrote:

When i am trying to move one of the wall, the other one follows. how can i break this connectiong?

https://forums.autodesk.com/t5/revit-architecture-forum/wall-split-how-to-separate-resulting-element...

i found a old post about the same problem, but i cannot use tab to find the slit line. can someone help?

---

Reveal Constraints and unlock the constraint.

[barthbradley]

Interesting @ToanDN.  That doesn't seem to work for me with a horizontally split wall.  Split with Gap and deleting the in-between wall allows me to gain independent control of top and bottom walls though.   

My Revit must be broken.  Arrgh. 

[barthbradley]

@xu.teng...Selecting one of the Split Walls and Clipboard Cut/Paste Aligned to Same Place seems to be a workaround as well.  

[ToanDN]

---

@barthbradley wrote:

Interesting @ToanDN.  That doesn't seem to work for me with a horizontally split wall.  Split with Gap and deleting the in-between wall allows me to gain independent control of top and bottom walls though.   

My Revit must be broken.  Arrgh. 

---

Same question.

https://forums.autodesk.com/t5/revit-architecture-forum/unjoining-walls-after-creating-split-in-elev...

[barthbradley]

Got it. My bad. Thanks, @ToanDN. 

[xu.teng]

@ToanDN @barthbradley 

thanks for your guys help. But there seems no constrains on my walls, and when i move them, you can see the upper wall follows. i am trying to slit one of my wall and delete the constrains, but when i move them horizontally, both of them moved. do i miss something?

  

  

[RDAOU]

@xu.teng 

Can u attach the model or a partial copy of it for a closer look at the issue?

I am guessing that those splits are in the wall type structure

[xu.teng]

tried a couple times again, i can only break the vertical connections, but horizontally. they follow each other when moved 

[barthbradley]

REVEAL CONSTRAINTS. 

[xu.teng]

@RDAOU @barthbradley @ToanDN 

Here is the model, i have delete the constraints, but not working for horizontal moving 

[ToanDN · Accepted solution]

[xu.teng]

thank you. it works now when i check disjoin.