wall joint

[yazan.hijazeen]

Hi everyone,

we have at our model this situation where 2 walls are connected, but because both have different hight dependencies , the connection is not clean, i tried to adjust it with the wall connection tool, but it does not work. Does anyone know how can I solve it? Thanks in advance.

 

[barthbradley]

What are you trying solve exactly?  

....where is the plan view cut plane located? Above that 3D geometry or through it?  If above  it, then the plan view looks correct to me.  

[barthbradley]

I think it's all about the Plan View's View Range Cut Plane.  Does raising it or lowering it solve?  

[yazan.hijazeen]

what i am trying to solve here, is to remove the line between the joint walls as shown in the screenshot to have a clean joint, I also tried playing with the viewRange cut plane, but it's not changing anything.

[barthbradley]

If you are actually cutting through all those walls - and they are joined - then that linework shouldn't be there.  

Maybe Phasing? Set Phase Filter to Show Complete.  

[barthbradley]

Do any of those walls have a Base or Top Extension?  

Base Extension Distance changes how walls joins look graphically | Revit | Autodesk Knowledge Networ...

[ToanDN]

What is the condition at the base of these walls?

[yazan.hijazeen]

so all 3 walls share the same base level with no extension

[yazan.hijazeen]

so I did a quick test, where i drew walls as a chain and then modified the top constrain as required, the joint is still clean, but this means, the walls need to be replaced as a chain and this is not practical, as I have multiple similar situation. 

[ToanDN]

---

@yazan.hijazeen wrote:

so all 3 walls share the same base level with no extension

---

Can you isolate the 3 walls and show a 3d view looking at the base?

[yazan.hijazeen]

[ToanDN]

The bases appear to be at different heights (maybe attached to something), are they not?

[yazan.hijazeen]

yes, they share the same base constrain, but attached to different Floors

[ToanDN]

---

@yazan.hijazeen wrote:
yes, they share the same base constrain, but attached to different Floors

---

Is your view Hidden or Wireframe?  Are walls category, or wall elements transparent?

[yazan.hijazeen]

the view is set to Hidden and walls are not transparent.

[ToanDN]

---

@yazan.hijazeen wrote:

the view is set to Hidden and walls are not transparent.

---

I am asking about the plan view, not the 3d view.

[yazan.hijazeen]

sorry, same settings in plan view 

[ToanDN]

Can you share the file?

[yazan.hijazeen]

unfortunaltely, i can't share work related information.😕

[ToanDN]

Do you see the lines if you create a new plan view from scratch, not duplicating from another view?