View and Modification options on different levels

[Anonymous]

Good day

I'm busy with a tutorial house plan (Training). Level 1 + Level 2 + Roof...

Adding windows and doors on level 1 was fine. (It gave me modification options to flip doors see to which side it opens...).

Now I started with level 2 and it wont show me where I placed a window or door or which side it opens to or select it... When I move to 3D view it shows but not in 2D Level 2.

Not sure if it might just be a setting...?

Level 1

Regards

Natasha

[Ilic.Andrej]

Maybe the problem is about the view range. Open the floor plan, find "View Range" in the properties palette. See where the cut plane is.

[ennujozlagam]

check your view range setting in properties, adjust your value . thanks

[Anonymous]

Thank you 

There is defiantly an improvement but now the doors are gone in 2D view.

[Ilic.Andrej]

Change level of detail from coarse to fine. Maybe that's the issue

[Anonymous · Accepted solution]

Hi

Thank, but I did try that. I also noticed that trying to place a door creates the issue if not showing the door in the location I want to place it. It does however show me the dimensions but not the door.

I received this warning issue... Help please.

[Anonymous]

Would like to thank all for your help!! I managed to fix the issue!!! 

Solution: To resolve the issue, try the following:

1. Check visibility of elements in the view. Click View tab Graphics panel (Visibility/Graphics). ...
2. Check design option settings for the view. Click View tab Graphics panel (Visibility/Graphics).

Feb 11, 2019

[barthbradley]

Here's 33 more for you if you encounter that warning again...

https://www.revitforum.org/tutorials-tips-tricks/441-cant-see-view-heres-33-reasons-maybe-why.html

[Anonymous]

Thanks sooooo Much. This is great! Appreciate all the help!!!