Unique Roof

[Anonymous]

Hi.

I am struggling to create this roof.

Initially, I used the roof tool but now that we need the roof to be detailed in sections I need to fix the issue.

- It needs to sit at elevation 8-6 

-Bottom of the roof sits at 8-6 and aligns with the core of the wall on the interior

-On the outside I need it to be chamfered to meet the outside part of the wall.

I appreciate the help.

[Anonymous]

Link to the file: https://1drv.ms/u/s!AiVTPykte1TJiqNI8BNRZvJCqMt8fg?e=g17dO3

[dferreira-blackwell]

create as a floor element use shape editing tools as the need for slopes.

[constantin.stroescu · Accepted solution]

I see two ways of doing this:

• one would be using a flat Roof modified with Shape Editing tool.
• the second , and certainly , my favorite one : using Mass Editor and then Roof by Face - as shown in my attached screencast:

https://knowledge.autodesk.com/community/screencast/afcd1df1-ecd5-4b3b-9c2e-ebf1207728f3

[Anonymous]

Thank you for the video. I will try it but this seems to solve the issue!

[markshmitd]

It seems like you should reach this roofing contractor