Announcements

Starting in December, we will archive content from the community that is 10 years and older. This FAQ provides more information.

Revit Architecture Forum
Welcome to Autodesk’s Revit Architecture Forums. Share your knowledge, ask questions, and explore popular Revit Architecture topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Start and End Level Offset Beams dissapeared from Revit 2024

5 REPLIES 5
Reply
Message 1 of 6
j_bosma88VAS
696 Views, 5 Replies

Start and End Level Offset Beams dissapeared from Revit 2024

Hi all,

 

There seems to be something missing from Revit 2024.

In Revit 2023 one could adjust the offset manualy, this seems to be dissapeared from the Revit 2024 version.

See images included.

 

Does anybody know how to adjust the offset of beams in Revit 2024?

 

Sincerly,

john 

5 REPLIES 5
Message 2 of 6
Tom_Kunsman
in reply to: j_bosma88VAS

Hmm. Interesting. It is still in the properties for me. Does  this show the same for all beams? Would also try closing and reopenign the Properties dialog box. Would not hurt to also run an Audit on the model.

Tom_Kunsman_0-1719577347943.png

 

If you find my post interesting, feel free to give a Kudo.
If it solves your problem, please click Accept to enhance the Forum.
Message 3 of 6
Mike.FORM
in reply to: j_bosma88VAS

Definitely still there for me also.

As @Tom_Kunsman said it may be a glitched properties palette.

I have had that happen before where some of the parameters are not showing and even the scroll bar is unavailable.

Message 4 of 6
barthbradley
in reply to: j_bosma88VAS

Does this happen with every loadable Structural Framing Family, or just one in particular?  If the latter, post that Family here.  

Message 5 of 6
barthbradley
in reply to: j_bosma88VAS

My guess is that the family didn't start off as a Structural Framing Family.  

 

 

SFFMorph0.png

SFFMorph.png

 

Message 6 of 6
azad.Nanva
in reply to: j_bosma88VAS

this is simple issue , just change the start or end level offset for one frame in PlanView and will be fix.

 

azadNanva_0-1720017561514.png

 

If it solves your problem, please click Accept to enhance the Forum.

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report