Hello all,
I am having an issue on Revit LT 2021. I have a plan with 2 sections applied to it; 4 of which I have on one sheet, one above the other. 3 views are displaying the section line markers for the other sections, apart from one. I have check the visibility graphics and sections are marked as on; the lightbulb to the toolbar bottom left shows no hidden section lines; and the "hide at scales coarser than" is set to a high scale and the same as the other section views on the page. To my knowledge, all four section views on the page have the same settings. I have even checked the far clip offset to see if the view would be beyond the offset but that all seems grand.
All the issues online point towards the "hide at scales coarser than" but this isnt my issue (i think). I ve attached a screenshot of my sheet and views.
Any help muchly appreciated, thank you
Solved! Go to Solution.
Solved by barthbradley. Go to Solution.
Solved by ToanDN. Go to Solution.
Check the Phase of the View.
...Check through this list:
Missing Something in a Revit View? 33 Steps to Find Stuff | Ideate Inc
Maybe I misunderstood. Are you saying the Section Markers are just not showing on the Sheet, but they do show in the View itself?
Okay. I find it hard to believe nothing in that list applies. Is the View's Far Clip intersecting the Section Marker? Set it to No Clip.
...do those unseen Markers Reference other Views?
What does the plan view look like? make sure the extents of the sections extends to the wall elevation. as well as try "reveal hidden" just in case..
Number 27 would be the Far Clip I mentioned above - assuming those Section Markers are in front of the Section Marker that created that View.
That wouldn't change any of the above feedback. Are these unseen Section Markers of the Type the reference another View? I asked this above.
...can you just post the file so we can dispense with the guessing?
Please see the file attached. The issue im having is on sheet "0203 - Ground Floor - Internal Elevations 01" and the elevation is "0F - Internal Elevation South - Hall"
@twhitwell6 wrote:
Yes they are, sorry i must have missed that question. I will try and post the file now.
Yes, they are Referencing Other View???
If the section lines are not perpendicular to the elevation view then they will not show in that view. Workaround, place sections on that view and reference the actual section views.
Can't find what you're looking for? Ask the community or share your knowledge.