Revit Visibility Problem

[Vasilii_Bogdan]

Hello I don't see anything below the Second Floor in Plan view in Revit 2019. 

Could you please refer to the attached file and tell me what could be the reason? Thank youuuuuu!

[bin]

I guess it's not about the view range... can you upload a purged model?

[barthbradley · Accepted solution]

Could be Phasing. Set Phase Filter to "None" to verify. 

Here's a cheat sheet to reference when you can't find "stuff" in a view:

https://www.ideateinc.com/blog/2013/01/missing-something-in-revit-view-33

[Vasilii_Bogdan]

Thanks so much for reply. 

However, the person below got it right it was phase filter which needed to be set to "none"

[Vasilii_Bogdan · Accepted solution]

Thanks so much! I was looking for answer to this problem for several days and you gave me short and right point that worked!

[bin]

Good to hear, at least now you know it’s not View range issue. But you need to decide a proper phase filter for your view. None is more for trouble shooting.  

[Vasilii_Bogdan]

I am still on training with Revit and not sure what this phase filter is
all about. Will need to dig into it. But for now I just put it to "none"
and it worked! 🙂

[bin · Accepted solution]

https://revitpure.com/blog/6-tips-to-master-revit-phases

this can be helpful.