Revit type image not loading itno project

[ShareefAlhussain]

I have light fixture that i try to include it's image in a schedule, but i found that it's image does not loading into my project, and appear as none.

[syman2000]

Try edit the family. In the family editor, add your image

Once you load the family into the project, the image will appear and it is grey out.

[ShareefAlhussain]

Hi @syman2000, and thank you for your attention, i already tried that but it doesn't load!!??

[syman2000]

Are you using Revit 2024? I tried this with 2022 and it seems to work fine. Try saving and renaming the family. Load the new family in and see if the image still appear.

[barthbradley]

I don't know what the issue is on your end. Everything is peachy-keen on my end.  BTW: Images only show on Sheets.

[ShareefAlhussain]

Yes @syman2000, I'm using revit 2024.1, i only faced this issue with 2 families, the others are working fine.

[barthbradley · Accepted solution]

Ah! I see why. The one you posted is not the one you showed in your Screenshot. 

[barthbradley]

---

@ShareefAlhussain wrote:

Yes @syman2000, I'm using revit 2024.1, i only faced this issue with 2 families, the others are working fine.

---

Can you post the problem child family?  

[ShareefAlhussain]

Oh, my fault!, here is a copy.

[syman2000 · Accepted solution]

When you load in the family, did you choose the second option? If you choose the first, it will not override the image parameter.

[barthbradley]

Make the Family Shared and reload into Project. 

[ShareefAlhussain]

Yeah of course @syman2000, but also didn't work.

[ShareefAlhussain]

I tried that @barthbradley , but the issue still there 

[barthbradley]

---

@ShareefAlhussain wrote:

I tried that @barthbradley , but the issue still there 

---

Well, it works on my end just fine.  No issues. Screenshot above proves it.  Are you sure you checked the box next to "Shared" in the Family?  

[barthbradley]

Try this one....

[ShareefAlhussain · Accepted solution]

Well ot turned out that the whole time i was trying to assign the image for another type in the family 😅, thank you guys @syman2000 @barthbradley, and thank you for your time.

[barthbradley · Accepted solution]

---

@ShareefAlhussain wrote:

Well ot turned out that the whole time i was trying to assign the image for another type in the family 😅, thank you guys @syman2000 @barthbradley, and thank you for your time.

---

I'm not following. The Image did not load into Project until I set the Family to Shared.  That "problem" Family you posted DID NOT have Shared checked and so the Type Image was "None" in the Project -just like your Screenshot shows. The solution is to make the Family SHARED.