Revit coordinate system

[mbiAK7WZ]

Hello there

i have the pleasure of started working on a project that is 10 months in process, and it is not in the right coordinate system, my question goes to how i can get it back into the right coordinates again. i have tried everything i know how to do atm. is there a easy way to my set my coordinates with the internal origin stays at 0.0.0? 

my coodinates is

N/S 1159014960.0

E/W 37897867.9

Angle to true north 0 degrees

and they need to be

N/S 1158753946.3

E/W 378749107.5

Angle to true north 322 degrees

hope one of you have a smart way for me to change it

thanks 

[mbiAK7WZ]

Hello there

i have the pleasure of started working on a project that is 10 months in process, and it is not in the right coordinate system, my question goes to how i can get it back into the right coordinates again. i have tried everything i know how to do atm. is there a easy way to my set my coordinates with the internal origin stays at 0.0.0? 

my coodinates is

N/S 1159014960.0

E/W 37897867.9

Angle to true north 0 degrees

and they need to be

N/S 1158753946.3

E/W 378749107.5

Angle to true north 322 degrees

hope one of you have a smart way for me to change it

thanks 

[barthbradley · Accepted solution]

Internal Origin is always 0,0,0.

Specify Coordinates at Point:  

https://knowledge.autodesk.com/support/revit/learn-explore/caas/CloudHelp/cloudhelp/2021/ENU/Revit-M...

[barthbradley · Accepted solution]

Internal Origin is always 0,0,0.

Specify Coordinates at Point:  

https://knowledge.autodesk.com/support/revit/learn-explore/caas/CloudHelp/cloudhelp/2021/ENU/Revit-M...

[ToanDN]

Select Project Base Point and enter those values.

Scratch that.  Do use Specify Coordinates at Point and point to the Project base Point to enter the correct values.

[ToanDN]

Select Project Base Point and enter those values.

Scratch that.  Do use Specify Coordinates at Point and point to the Project base Point to enter the correct values.

[barthbradley]

I wouldn't enter those coordinate values into the project base point.   

[barthbradley]

I wouldn't enter those coordinate values into the project base point.