Railing embedded in wall

[tstewart]

How to embed a railing, or make it in front of a wall that is (3) stories?

[barthbradley]

Why can't you sketch it in front of the Wall? 

...or are you saying you want a 3-story tall balusters?  

...Maybe doing the Railing as a Curtain Wall/Panel would be better.  Can you post an Elevation View of Railing? 

[tstewart]

The wall is a 3-story element, so the railing is on the 1st floor.

[tstewart]

The railing needs to be in front of the wall. whenever the wall is cut, it disappears on all floor levels.

[Lachlan-JWP · Accepted solution]

hat are you trying to make? Is it a railing for a balcony? If so it might be best to use a railing family, that way it hosts to a level, not to a wall that you are cutting away.

[bin · Accepted solution]

Maybe you can model it anywhere and pick new then pick the floor on that level.

[barthbradley · Accepted solution]

I'm terribly confused. "Railing embedded in wall"???  Are you maybe trying  to figure out how to create an opening in the Wall for the railing  -- or is the railing fastened to the exterior of Wall as a decorative element (e.g. no Wall opening)?  

 

[tstewart]

I'm trying to show railings on multiple floors, while not cutting the lower walls. I think that I have solved it.