Problems with Revit Graphis

[Anonymous]

I am having a problem with the graphics in Revit, objects are not lining up and appear to move when zooming in. Objects look as though they are not connected and when I try to pick lines I often need to select well away from the line to pick it up.

[ennujozlagam]

hi, try to go options > graphics > use hardware acceleration (untick). and see how it goes. thanks

[Anonymous]

Hi, Thanks for the advise, still haven't worked after I untick - use hardware acceleration.When I go to options a message comes out saying Untested Environment (We regret that the installed video card (AMD FirePro V3900 and driver have not been tested with the currently installed OS/ DirectX version combination.

[ennujozlagam]

Hi, then try to install the latest graphics card driver.

[Anonymous]

Hi Thanks for the advise. I have installed the drivers but didn't work, we are going to upgrade the video card too, and will let you know what happens. Thank you

[loboarch · Accepted solution]

The kind of behavior you are describing is sometimes caused by drawing elements very far from the internal 0,0 point of Revit. This could also occur if somehow you have a DWG in the project that has been created a long distance from the 0,0 origin. I would check if you have something very far away from the origin.