PRINT DELIMA

[Anonymous]

I am trying to make a a print and when I press cntrl + P and then I want to select the 'preview' and or 'select' and or 'setup' which I have higlighted in yellow it doesnt work . I never had this issue before and it is quite a new problem.  

[ennujozlagam]

@Anonymoushello mate. I didn't experience what you had experienced in printing. see screencast. thanks

try to install altest updates from autodesk.

[Keith_Wilkinson]

Have you tried selecting another printer to see if the problem exists there as well?

Also, have you tried restarting Revit and/or the computer?

[ennujozlagam]

@Anonymous my apology, i misunderstood your question. thanks

@Keith_Wilkinson

i think what he wanted is when you select the "selected views/sheets" the preview is also highlighted that you can see the preview, which is not possible.

[Keith_Wilkinson]

No, preview with selected Views/sheets isn't an option - never has been as far as I'm aware.

The original question reads that all 3 options are not available but maybe I'm misunderstanding it.

[Anonymous]

I have restarted the systme and also revit but stil th eproblem persists. Might try to reinstall revit.

[Anonymous]

How do i update revit?

[Anonymous]

hi mate. the options you press and opens up is frozen in my revit

[ennujozlagam]

@Anonymous hello mate, i think you need to install latest updates and could solve your issues. if you are under autodesk subscriptions just go to your autodesk account HERE and log-in. please see attached. thanks

[Keith_Wilkinson]

can you just clarify exactly what the problem is?  Are you unable to select any of the 3 buttons you've highlighted in your original post?

[Anonymous]

That's exactly what I said as I said I am unable to press the highlighted
buttons

[Keith_Wilkinson]

Have you tried selecting a different printer?

[RDAOU]

@Anonymous

If I were you, I would follow @Keith_Wilkinson advice and select another printer...the print to PCP doesn't give you access to those options and I do not believe it is for printing from REVIT or any other AEC Platform.  .PCP stands for Patch Creation Properties!

I think you were most probably intending to use PDF print

[Anonymous]

yes i have selected a differnt printer but th eproblem still persists. in fact my revit behaving strangely in many othetr way s as well.  

[Keith_Wilkinson]

Well if it is the same with all your other printers then I'd go for the notion that your install is corrupt.

You could try running a repair on it (you should get this option if you run the installer again before uninstalling Revit) or as has also been suggested check your version is fully up to date in terms of Updates.

[ennujozlagam]

@Anonymous hello mate, have you resolve your issue? if not you can try this "Uninstall (Windows 7) KB 3177725 and (Windows 10) KB 3176493" see if this helps. thanks

[Anonymous]

Sorry for late reply. I tried all methods which were suggested here but unfortunately non of them worked . I just save each sheet as a pdf seperately. 

By pressing control P them select preview then save as PDF.