Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
@Anonymous NO, cannot create username and password. Revit model is for coordination and collaboration. thanks
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
@Anonymous NO, cannot create username and password. Revit model is for coordination and collaboration. thanks
Remember : without the difficult times in your LIFE, you wouldn't be who you are today. Be grateful for the good and the bad. ANGER doesn't solve anything. It builds nothing, but it can destroy everything... Please mark this response as "Accept as Solution" if it answers your question. Kudos gladly accepted.
@ToanDN, I think his concern is for unauthorized changes
@Anonymous - the only thing that I can think of is to send a read-only file.
However I don't think that any consultant / collaborator would want to run the risk of taking on your liability by making unauthorized changes to your model.
Rina Sahay Autodesk Expert Elite Revit Architecture Certified Professional
If you find my post interesting, feel free to give a Kudo. If it solves your problem, please click Accept to enhance the Forum.
@ToanDN, I think his concern is for unauthorized changes
@Anonymous - the only thing that I can think of is to send a read-only file.
However I don't think that any consultant / collaborator would want to run the risk of taking on your liability by making unauthorized changes to your model.
Rina Sahay Autodesk Expert Elite Revit Architecture Certified Professional
If you find my post interesting, feel free to give a Kudo. If it solves your problem, please click Accept to enhance the Forum.
