IFC export problem with level and rotation

[Anonymous]

I am trying to export IFC for a building. I have an IFC from the Construction which position fine when I insert in the model, but when I export

my Revit model and add them togther the two model don't match as in Revit. My model has Another rotation and is far away down from the Construction model. I have the latest app to export IFC in Revit.

[Viveka_CD]

Hi @Anonymous

Can you try to open the IFC file and then create a  new Revit file (name it as IFC 1 for your reference)

Then  link the IFC 1 to your  Revit model and  acquire its coordinates

Let me know if you were able to resolve your issue.

If my post answers your question, please click the "Accept as Solution" button. 

Regards, 

[Anonymous]

I can't select the IFC when acquiring. And when I select it there is no option to acquire.

[Viveka_CD]

Hi @Anonymous

This issue is being investigated for a workaround.

Can you send us a file to troubleshoot? Let me know if you have any questions in sending the file.

[Anonymous]

I have a problem upploading file. The file size is about 130 MB and that allowed 78. I also can't uppload the ifc file because it is not allowed to uppload such a file type.

[Viveka_CD]

Hi @Anonymous

I'm checking back to see if you are able to upload your file to the private link sent to your email. This has been requested by development many times.

Let me know or I can resend you another upload link. Also, please share your alternate email.

Regards,

[Anonymous]

Thank you. I didn't get any email concenring the uppload. Anyway I am no longer responsible for this and responsiblity Went to Another Company.

RGRDS

[Viveka_CD]

Hi @Anonymous

The upload link was sent to your email on your profile page.

I will mark this case as closed.Please feel free to post on our forums if you have any other questions.

Best Regards,