How to buy
Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use | Legal | © 2025 Autodesk Inc. All rights reserved
For our Free Open Source 3D Model of Dealey Plaza, I need to position the sun.
Its location respect to the Plaza, on November 22nd, 1963 at 12:30 pm may be determined here:
NOAA Solar Calculator Find Sunrise, Sunset, Solar Noon and Solar Position for Any Place on Earth
The big question is: what do I do with the data obtained? I will need to do this in either 3ds Max, Revit or both.
TIA,
-Ramon F. Herrera
JFK Numbers
ramon@jfknumbers.org
This Shadow is Wrong
Solved! Go to Solution.
I think I will experiment with the azimuth and elevation.
-Ramon F. Herrera
JFK Numbers
ramon@jfknumbers.org
I can get to 1970 in Revit 2019. Close enough?
@ToanDN wrote:I can get to 1970 in Revit 2019. Close enough?
'fraid not. : -)
One of the fascinating findings of this project is that people have been making up numbers, distances and angles forever. For decades so-called JFK "researchers" (LMAO) have been debating whether the back shot entered the victim through T3 or T4 (whatever that means).
I knew about the Lincoln Continental: in all 3D models they lower, raise, widen, narrow the limo under the presidential asset in order to obtain the desired, pre-ordained results. However, this fudging (lying) happens all over the place. Even the height of the TSBD building (below) has inconsistent measurements. I will have to travel to Dallas (4 hours north of Houston) armed with a cheap laser gizmo, get permission from the Sixth Floor Museum to go to the roof, in order to get the exact height.
This is from a 6th. floor, so a fraction of a degree makes a large difference.
Next Phase of the Project
It doesn't matter how minute a detail, people will debate it. This is the reason for my/your/our Free Open Source 3D Model of Dealey Plaza being the first real scientific study. We place all our files, everything we find and produce where they belong: in a public web server:
http://dealey-plaza.org/this-government-as-promised/
I am fond of saying:
"Those files do not belong to me. They belong to The People".
Thanks again!
-Ramon F. Herrera
JFK Numbers
ramon@jfknumbers.org
Hasn't the Sun been in the same exact orbit around the earth for a millennium? I mean, wouldn't the position of the Sun over Dallas on 11/22/1963 be identical to the position it was in on 11/22/2019?
That aside, I don't think there is much Sun at 11:30PM anyways.
"Its location respect to the Plaza, on November 22nd, 1963 at 12:30 pm may be determined here:"
-Ramon
JFK Numbers
ramon@jfknumbers.org
Once upon a time in Dallas, Texas...
November 22, 40,000 years ago.
Since Revit do not offer lighting/shadow data prior to 1/1/1970, you could statistically prove 1963 wasn't any different by showing such data for 10-20-30 years since 1970. if that still doesn't fly, well, maybe skip JFK and do something about more recent assassinations.
@ToanDN wrote:If that still doesn't fly, well, maybe skip JFK and do something about more recent assassinations.
Sorry, can't do.
Like in Titanic when Jack told Rose: "I cannot quit, I am too involved already" : -)
Please take a look at this videoclip. Ignore the silly trailer, the important part is my comments at the bottom.
-Ramon F. Herrera
JFK Numbers
ramon@jfknumbers.org
@ToanDN wrote:
Didn't know you were Hugh Jackman. Sorry about that.
Speaking of good looking people, check this one out, with the shapely legs of a pretty lady:
Is JFK Numbers Too Good To Be True?
-Ramon F. Herrera
JFK Numbers
ramon@jfknumbes.org
All this sophomoric and silly “accredited” joking aside; I am wondering why the heck Revit has Sun Settings by month, day, time AND YEAR dating back to 1970? The Earth’s orbit around the Sun hasn’t changed is over 100,000 years – and the tilt of the Earth’s axis hasn’t budged in over 41,000 years. Therefore, the Sun has been the same exact position in the sky at 12:30 PM on November 22 – EVERY YEAR of Mankind's existence on this third rock from the Sun.
@barthbradley wrote:All this sophomoric and silly “accredited” joking aside; I am wondering why the heck Revit has Sun Settings by month, day, time AND YEAR dating back to 1970?
It comes from Unix internals. The 'time' family of system calls return an integer. Zero (aka "The Epoch") is January 1, 1970.
-Ramon The Linux Hacker
JFK Numbers
Linux Programmer's Manual
Okay, so just to dumb this down for those of us aren't Mensans, this is basically about clock synchronization to account for the loss milli-seconds (1.7 ms per century) due to the fact that the Earth's rotation is slowing. Right? So, the bottom line is that 12:30:00.000 PM on November 22, 1963 is not the same as 12:30:00.000 PM on November 22, 1970. But, it’s within 0.00119 seconds by my calculations. I could be wrong though. Like I said, I’m no Mensan.
@barthbradley wrote:Okay, so just to dumb this down for those of us aren't Mensans, this is basically about clock synchronization to account for the loss milli-seconds (1.7 ms per century) due to the fact that the Earth's rotation is slowing. Right? So, the bottom line is that 12:30:00.000 PM on November 22, 1963 is not the same as 12:30:00.000 PM on November 22, 1970. But, it’s within 0.00119 seconds by my calculations. I could be wrong though. Like I said, I’m no Mensan.
Barth:
I trust that the NOAA is doing a proper job.
NOAA Solar Calculator Find Sunrise, Sunset, Solar Noon and Solar Position for Any Place on Earth
They gave us that very nice resource, let's take it for a spin...
-Ramon
JFK Numbers
Always Go to AUTHORITATIVE Entities
HA! @Anonymous : I already have enough brain pain. I don't want to crunch any more numbers. Just tell me this: what is the difference between Sun's position in the sky over Dallas at 12:30 PM on 11/23/63 and its position at the same time on 11/23/70? Is it measurable? More importantly, would it change anything?
BTW: what was the cloud coverage on that day? You know it had just stopped raining prior to the motorcade arriving at Daley Plaza.
How to buy
Privacy | Do not sell or share my personal information | Cookie preferences | Report noncompliance | Terms of use | Legal | © 2025 Autodesk Inc. All rights reserved
Type a product name