How to change the highest point of roof

[lindali1]

I try to make the roof match with a truss. If I edit either slope of the roof, the highest point of the roof was changed. I tried to adjust in " offset from the roof base". it seems don't work. 

[ToanDN]

You can drag it up in a section view using the grip on the peak.

You can draw a flat roof, edit subelements, add peak line and change it's elevation.

[lindali1]

I am confused. Could you explain more?

I google it and try to learn to do the sub-element

"Click Modify | Floors tab - Shape Editing panel-Modify Sub Elements"

Trying to find Sub Element in Modify|Roofs. But I don't find the sub-element option

Could you please let me know what is the next step?

thank~

[ToanDN]

Try the 1st method it maybe easier.

[lindali1]

I don't get the first method. In the section view, I picked the roof and try to drag it, it can adjust the slope's angle, but the peak's location of the roof won't be changed. Do I miss something? working on the edit footprint? or Properties board?

I google a lot and still don't know how to work on it. 

Could you explain in more detail? please 

[d.ahmed.LW]

hi @lindali1, 

does this help? 

[lindali1]

Maybe I don't explain it clearly. The slope of the roof is not the same 

[lindali1 · Accepted solution]

Hello All

I think I find what I want. I have spent a lot of time to figure it out. 

https://www.bilibili.com/video/BV1FF411L7Au/?spm_id_from=333.337.search-card.all.click

Thank all reply my ask. 

[d.ahmed.LW]

Great, do mark the solution and close the topic.

[ToanDN · Accepted solution]

You can also do a roof by extrusion and draw the roof lines matching the truss.

[barthbradley]

Is this what you are trying to do?