How can I export only the core portion of my walls? I don't want to export gypsum board or furring or exterior finish (See image).
Thanks for your guidance!
John
How can I export ONLY CORE Structure[1] Walls
You cant by default....
couple options if you absolutely need to do it:
Parts:
- You can make the walls into Parts and hide the wall elements you don't want.
Copy Monitor: https://autode.sk/3kVdtrr
- place all walls on a Workset
- Create a workset for the core wall
- Copy Monitor the walls.
- in the Options, pick Core Centerline for the location line
- for the Original/New pick the core type and size
- once placed, turn off the worksheet the original wall is on.
Trace:
- trace the core of the wall with a new wall.
- preferably on a different workset.
https://forums.autodesk.com/t5/revit-ideas/wall-structural-component/idc-p/9288195#M30895
https://forums.autodesk.com/t5/revit-ideas/wall-detail-level/idc-p/9307468#M31032
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
@johnwPerhaps you have a use for override Host Layer Line styles. You could think of combining it using Design options/edited wall type/Line work ie. (for 2d export)...
@barthbradley LOL, that's funny, I've actually never seen that Bob Mackay trick before. figures someone else figured it out too, and back in 2012. i figured it out a while back when one my structural engineer was inquiring about the same issue.
Howard Munsell
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
