Flat top rail @ top step

[info]

HI,

The top rail is flat @ top of stair case (for top step), I would like the rail continue straight up not flatten out. 

When I create a new stair case the problem persists. Please see attached.

But when I open a new project the rail is parallel to the stair case which is what I want.

Please see attached. 

[info]

HI,

The top rail is flat @ top of stair case (for top step), I would like the rail continue straight up not flatten out. 

When I create a new stair case the problem persists. Please see attached.

But when I open a new project the rail is parallel to the stair case which is what I want.

Please see attached. 

[ToanDN]

Edit Top rail type and set Top extension to the length you want.

[ToanDN]

Edit Top rail type and set Top extension to the length you want.

[info]

Adding an extension doesn't change the flat section(at top) within the staircase.

The problem is the flat portion within the staircase instead of it continuing up parallel with bottom of staircase 

[info]

Adding an extension doesn't change the flat section(at top) within the staircase.

The problem is the flat portion within the staircase instead of it continuing up parallel with bottom of staircase 

[info]

 

[info]

 

[info]

this is when I create a stair case in another project. it works

[info]

this is when I create a stair case in another project. it works

[ToanDN]

Tick End with Riser for your Run.

When you place the railing, choose On Stringer instead of On Treads.

[ToanDN]

Tick End with Riser for your Run.

When you place the railing, choose On Stringer instead of On Treads.

[info]

I'm sorry I don't understand.

[info]

I'm sorry I don't understand.

[info]

your version of Revit looks different than mine

[info]

your version of Revit looks different than mine

[ToanDN]

---

@info wrote:
your version of Revit looks different than mine

---

It is the same for any version.  Share your file here.

[ToanDN]

---

@info wrote:
your version of Revit looks different than mine

---

It is the same for any version.  Share your file here.

[info]

I'm sorry I can't.

[info]

I'm sorry I can't.

[info]

This is my properties for stairs

[info]

This is my properties for stairs

[RDAOU · Accepted solution]

@info 

One click you select the Stair

You need to  TAB and select the RUN then check End with riser

[RDAOU · Accepted solution]

@info 

One click you select the Stair

You need to  TAB and select the RUN then check End with riser

[info]

Thanks that worked.

[info]

Thanks that worked.