Double door help

[emilin_shahbaz]

i'm trying to replicate the double doors in the laundry room(notice how they overlap) but am struggling yo find the specific door. Can anyone please help.

[vitorbortoncello]

Probably a constrain issue. If you post the family maybe we can help you more

[barthbradley]

There is nothing wrong in that screenshot.  What do you see as a problem? Overlapping Swing Lines?  

[barthbradley]

Here; use this family in yours. It has a parametric swing. 

P.S. This Family is also in Revit's  stock Content Library . 

[kadmonkee]

the door swing arc end point needs to be constrained to the door panel swing angle reference plane

[handjonathan]

Hi @emilin_shahbaz 

Thanks a lot for posting your question to the forums!   Have the solutions suggested by @vitorbortoncello @barthbradley @kadmonkee helped with your issue?
 
We look forward to hearing back from you with more information so we can help you as a community! 

[emilin_shahbaz]

I wanted to figure out how to get a double door but only change the angle of one of the doors, not both. So fully replicate it. The right door to be 90 degrees and the left to be a different angle. Thanks

[emilin_shahbaz]

I wanted to figure out how to get a double door but only change the angle of one of the doors, not both. So fully replicate it. The right door to be 90 degrees and the left to be a different angle. Thanks