Doors missing in linked Revit model

[Berrys_Cooling_Drafter]

I am linking an architectural model into my project for some reason when I link the model the doors don't show the full door I can't figure out why can you please help m I need the architectural linked model to have everything show up as normal.

See attached picture

[Yien_Chao]

check the worksets, phases, options, view range...

[Berrys_Cooling_Drafter]

@Yien_Chao 

View range is the same 

how do I change the other settings you mentioned and do I do it while its linked or I need to do it before I link it 

can you please show me how to do it

[hmunsell]

what is the discipline of the view set to? please add a screenshot of your Properties window for each view.

[Berrys_Cooling_Drafter]

on all disciplines it doesn't change they all show the same missing parts of the door

[Anonymous]

Maybe the level of detail, also check the visibility setings in the family editor 

[TripleM-Dev.net]

Hi,

From what I can see the something from the door is visible, the 2 views have different detail levels, maybe the door family is built with different representation in the fine level.

Try setting you're view to Medium see if that solves it?

- Michel

[Berrys_Cooling_Drafter]

no that didn't help 

[Berrys_Cooling_Drafter]

@hmunsell  see attached 

[barthbradley]

I've probably given you this cheat sheet before...

https://www.ideateinc.com/blog/2013/01/missing-something-in-revit-view-33

[hmunsell]

couple things i notice off the bat is

• the Original Model image has a View Template and is set to Coordination. 
• the Model Linked image does not have a View Template applied and is set to Mechanical.

id start by checking the VT settings. what happens if you make a New view based on the Ground Level with no VT in the Model Linked model?

[TripleM-Dev.net]

Cut height seems different, see stairs and other elements.

Check in a section if the link is actually placed at the correct height!

Stairs cut symbol position different

[Berrys_Cooling_Drafter]

@TripleM-Dev.net  that was just the view range I changed it now it looks the same by the stairs but the doors are still different see pic attached 

[TripleM-Dev.net]

Door swings missing, check the SubCategories of the doors category. if everything on.

Else check the doorfamily.

[hmunsell]

is there any way you can upload the models?

[Berrys_Cooling_Drafter · Accepted solution]

@hmunsell @TripleM-Dev.net @barthbradley @Anonymous @Yien_Chao 

Detail lines were off the invisibility Graphics overrides

Thanks for all your help trying to solve my problem I greatly appreciate it great community I am learning a lot from you guys. 

[barthbradley]

---

@Berrys_Cooling_Drafter wrote:

@hmunsell @TripleM-Dev.net @barthbradley @Anonymous @Yien_Chao 

Detail lines were off the invisibility Graphics overrides

---

[evick6X8CX]

did you make this change on the door family, or was it in the view template?