Create walls whit sweep

[gustavosanmartin]

Hello, someone knows how to get the lining created with the sweep option to project to the upper level of the wall as shown in the picture

[ToanDN]

Wall sweeps are always cut at the right angle. Use a void to trim them.

[barthbradley]

like this?

Just make the Wall height equal to ridge height, complete the sweeps all the way to the top, and then Attach Top of Wall to Roof.  

...and then JOIN Roof and Sweeps. 

TIP: Use MULTIPLE Join. Pick Roof first and then each Sweep one by one. 

[gustavosanmartin]

I have the following problem....

[barthbradley · Accepted solution]

Do you have a Roof? 

[ennujozlagam]

post that elevation file here so we can check. thanks

[Anonymous]

Hi,@gustavosanmartin 

If you are not success in Sweep then try Reveal, Create a wall groove profile and use as reveal in wall or create a model in place Wall void component then cut this extra part.

Thanks.

Please click "✓ Accept as Solution" on the posts that helped you, so others in the community can find them easily.

[gustavosanmartin]

THANK !!!!!   now I could do it

[gustavosanmartin]

Is it possible that you can show how to do it this way? attach the file

[Anonymous]

check the attached file for your reference.

Thanks

[gustavosanmartin]

Thank you for your response, but I still can't understand how to create the wall with the solid shape. You may be able to show step by step please