Can't get Stairs sitting flush with flooring

[Anonymous]

Hi guys, i have put a spiral staircase in my store, but i cant seem to get the top step, to sit flush with the floor, I have tried to change the desired stairs height, but that doesnt seem to make any difference? Thanks in advance. 

[RDAOU · Accepted solution]

Hey @Anonymous

1. Select Stair >> go to Modify Tab and Click Edit stair
2. Select the flight (steps)
3. In the properties palette >> Uncheck "End With Riser"

You will get a warning that the stair does not reach the top/destination floor...You will need to readjust number of risers and travel height

[Anonymous]

Thank you! 🙂

[RDAOU]

@Anonymous

Any time welcomed 🙂