can model-inplace sweep with void

[BIM_Dreamer]

it is possible that a model in-place sweep can cut with void like wall reveal? or any suggestions? thanks

[hmunsell]

Why not use the Wall: Reveal tool? what are you trying to do?

[barthbradley]

Create In-Place Void and then before you close out of In-Place Modeling Session, use the Cut Geometry tool to cut the System Family Geometry with the Void.  

Note: not everything will "cut".  For instance, you can't cut Stairs or Loadable Families with In-Place Voids. 

[BIM_Dreamer]

@hmunselli know what you mean. i had already mention that is a model in-place sweep profile and cannot use wall to do this. thanks

[BIM_Dreamer]

@barthbradley  it is a model in-place sweep profile and cannot cut as you've mentioned or can you please show it to me how to do that. thanks

[ToanDN]

Edit that model in place and add the void, then use cut geometry and finish.

[hmunsell]

so you have a element that was modeled in place, and you want to place a void on it to represent something similar to a Reveal? unfortunately Reveals can only be placed on walls. edit your Model in place and add the needed voids/cuts. 

https://autode.sk/2R6FGye

in this example i made the in-place family a wall, but it can be anything...

[BIM_Dreamer]

how.. show me,  it's a sweep model in-place. thanks