2 problems

[Anonymous]

Peace to everyone. I have 2 problems:

1 : Elevation Markers gets hidden when I TRY to change the scale of drawing from 1/8" = 1' to 12"=1' .

2 : Rooms not shown when I link my Architectural model to the Mechanical template. Yes I have checked the Room Bounding  in edit type of that linked file but still they're not shown.

Any quick help would be appreciated. Peace 🙂

[barthbradley]

Change the Elevation Marker's "Hide at Scales Coarser Than" value.

[barthbradley]

What do you mean by "Rooms not shown"?  

...I think I get it. You mean you can't create rooms from Link.  Right?  Change the View Level. 

[ToanDN]

12" = 1' is 1:1 so the elevation makers will be tiny as single dots in the view.

Turn on Rooms category under VG and if teh rooms don't show still, then go to VG > revit links tab > set the link to custom to turn on its Room category. Also, make sure the phases are mapped correctly between the link and the host.

Lastly, turn the link to Room bounding has nothing to do with the link rooms showing or not. It is for enabling the bounding to place your own rooms or spaces.