Solved: Re: Hole table add on drawing with existing origin indicator by rule

ralfmja · ‎09-09-2019

Hello,

I create rule which copy all old drawing to new template.

The rule copies everything into the current template except the hole table (i know it's impossible by API) but the origin indicator is copied to the new drawing so I think it isn't possible to create new hole table by API.

I need help in creating a rule that finds a drawing view with a origin indicator, selects this drawing view and creates hole tables for it.

The position of the newly generated table will be set to the upper left corner of the drawing frame.

On screen cast you can see my rule in action and below my code:

Dim oDoc As DrawingDocument
oDoc = ThisApplication.ActiveDocument 
Dim oSheet As Sheet
oSheet = oDoc.ActiveSheet
Dim invCustomPropertySet As PropertySet
invCustomPropertySet = oDoc.PropertySets.Item("Inventor User Defined Properties")
On Error Resume Next
    Dim NAZWAWL As String
    NAZWAWL = invCustomPropertySet.Item("NAZWA").Value
'MessageBox.Show(NAZWAWL, "Odczyt nazwy")
    If Err.Number <> 0 Then
        ' Failed to get the property, which means it doesn't exist
        ' so we'll create it.
        Call invCustomPropertySet.Add("", "NAZWA")
    Else
	End If
'MessageBox.Show(NAZWAWL, "Odczyt nazwy")
'odczyt wielkości arkusza
Dim Size As DrawingSheetSizeEnum
Size = oSheet.Size
'odczyt orientacji arkusza
Orient = OSheet.Orientation
'odczyt nazwy
If iProperties.Value("Summary", "Title")<> "" Then
Nazwa_rys = iProperties.Value("Summary", "Title")
Else Nazwa_rys=NAZWAWL
End If

oDoc.SelectSet.Clear

' Select all drawing views
Dim oView As DrawingView
For Each oView In oDoc.ActiveSheet.DrawingViews
oDoc.SelectSet.Select(oView)
Next

Dim oCopyCmd As ControlDefinition
oCopyCmd = ThisApplication.CommandManager.ControlDefinitions.Item("AppCopyCmd")

oCopyCmd.Execute

oDoc.SelectSet.Clear

Dim oTargetDoc As DrawingDocument
oTargetDoc = ThisApplication.Documents.Open("C:\Standard.idw", True)
oTargetDoc.Activate

Dim oTargetSheet As Sheet
oTargetSheet = oTargetDoc.ActiveSheet

oTargetSheet.Size = Size
oTargetSheet.Orientation = Orient

Dim oPasteCmd As ControlDefinition
oPasteCmd = ThisApplication.CommandManager.ControlDefinitions.Item("AppPasteCmd")
oPasteCmd.Execute

If oTargetSheet.Size = 9997 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A4 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9997 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A4 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9996 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A3 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9996 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A3 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9995 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A2 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9995 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A2 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9994 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A1 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9994 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A1 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9993 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A0 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9993 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A0 POZIOMO"
ThisApplication.ActiveView.Fit
End If

Dim oNOWYDoc As DrawingDocument:  oNOWYDoc = oTargetDoc
Dim WLASCNOWEGO As PropertySet
WLASCNOWEGO = oNOWYDoc.PropertySets.Item("Inventor User Defined Properties")
WLASCNOWEGO.Item("NAZWA").Value = Nazwa_rys

Arkusz=oNOWYDoc.Sheets.Item(1)

'aktualizacja danych
Dim oControlDef as ControlDefinition  = ThisApplication.CommandManager.ControlDefinitions.Item("UpdateCopiedModeliPropertiesCmd")

oControlDef.Execute2(True)


'REGUŁA DLA ZAPISU
If Arkusz.DrawingViews.Count <> 0 Then 
PNazwa=Arkusz.DrawingViews.Item(1).ReferencedFile.FullFileName
'MessageBox.Show(PNazwa, "Title")

Pozycja=InStrRev(PNazwa,"\", -1)
NazwaModelu=Right(PNazwa,Len(PNazwa)- Pozycja)
scieżkaRysunki = ThisDoc.WorkspacePath()& "\" & "Rysunki"
'MessageBox.Show(scieżkaRysunki, "scieżka")
	
	If (Not System.IO.Directory.Exists(scieżkaRysunki))Then
	System.IO.Directory.CreateDirectory(scieżkaRysunki)
	End If

NumerCzesci=iProperties.Value(NazwaModelu, "Project", "Part Number")
'MessageBox.Show(NumerCzesci, "Title")

Plik=scieżkaRysunki & "\" & NumerCzesci & ".idw"

'MessageBox.Show(Plik, "PLIK")

oDoc.Close(False)
On Error Resume Next'Goto ZAPISZ' 

oNOWYDoc.SaveAs(Plik, False)

'REGUŁA DLA NAZWY RYSUNKU
iProperties.Value("Custom", "NAZWA")= iProperties.Value(NazwaModelu, "Project", "Part Number")
InventorVb.DocumentUpdate()


'If WLASCNOWEGO.Item("NAZWA").Value = ""
'TYTUL = InputBox("PODAJ NAZWĘ ELEMENTU", "NAZWA RYSUNKU", WLASCNOWEGO.Item("NAZWA").Value)
'WLASCNOWEGO.Item("NAZWA").Value= TYTUL
'InventorVb.DocumentUpdate()
'Else
'End If


'aktualizacja danych

oControlDef.Execute2(True)

i = GoExcel.FindRow("BOM.xls", "Arkusz1", "Numer części", "=", iProperties.Value("Project", "Part Number"))
iProperties.Value("Custom", "SZTUKI") = GoExcel.CurrentRowValue("ILOŚĆ")
InventorVb.DocumentUpdate()

'REGUŁA DLA NAZWY RYSUNKU
TYTUL = InputBox("PODAJ NAZWĘ ELEMENTU", "NAZWA RYSUNKU", iProperties.Value("Custom", "NAZWA"))
iProperties.Value("Custom", "NAZWA")= TYTUL
InventorVb.DocumentUpdate()


'aktualizacja danych

oControlDef.Execute2(True)
End If

Can you help me with code to create hole table ??

Thanks in advance,

ralfmj

chandra.shekar.g · ‎09-11-2019

@ralfmja,

Please provide non confidential file to test the behavior.

Thanks and regards,

CHANDRA SHEKAR G
Developer Advocate
Autodesk Developer Network

ralfmja · ‎09-11-2019

Hello,

File in attachment.

standard.idw - template

Part.ipt - part and part.idw. drawing for part

Thanks in advance,

ralfmj

chandra.shekar.g · ‎09-12-2019

@ralfmja,

Hoping that below iLogic code may be helpful.

Dim oDoc As DrawingDocument
oDoc = ThisApplication.ActiveDocument 
Dim oSheet As Sheet
oSheet = oDoc.ActiveSheet
Dim invCustomPropertySet As PropertySet
invCustomPropertySet = oDoc.PropertySets.Item("Inventor User Defined Properties")
On Error Resume Next
    Dim NAZWAWL As String
    NAZWAWL = invCustomPropertySet.Item("NAZWA").Value
'MessageBox.Show(NAZWAWL, "Odczyt nazwy")
    If Err.Number <> 0 Then
        ' Failed to get the property, which means it doesn't exist
        ' so we'll create it.
        Call invCustomPropertySet.Add("", "NAZWA")
    Else
	End If
'MessageBox.Show(NAZWAWL, "Odczyt nazwy")
'odczyt wielkości arkusza
Dim Size As DrawingSheetSizeEnum
Size = oSheet.Size
'odczyt orientacji arkusza
Orient = oSheet.Orientation
'odczyt nazwy
If iProperties.Value("Summary", "Title")<> "" Then
Nazwa_rys = iProperties.Value("Summary", "Title")
Else 
	Nazwa_rys = NAZWAWL
End If

oDoc.SelectSet.Clear

' Select all drawing views
Dim oView As DrawingView
For Each oView In oDoc.ActiveSheet.DrawingViews
oDoc.SelectSet.Select(oView)
Next

Dim oPt As Point2d 
oPt = ThisApplication.TransientGeometry.CreatePoint2d(oSheet.HoleTables.Item(1).Position.X,oSheet.HoleTables.Item(1).Position.Y )

Dim oCopyCmd As ControlDefinition
oCopyCmd = ThisApplication.CommandManager.ControlDefinitions.Item("AppCopyCmd")

oCopyCmd.Execute

oDoc.SelectSet.Clear

Dim oTargetDoc As DrawingDocument
oTargetDoc = ThisApplication.Documents.Open("D:\Chandra\Autodesk Cases\Inventor\Sep-2019\15742647\SAMPLE\Standard.idw", True)
oTargetDoc.Activate

Dim oTargetSheet As Sheet
oTargetSheet = oTargetDoc.ActiveSheet

oTargetSheet.Size = Size
oTargetSheet.Orientation = Orient

Dim oPasteCmd As ControlDefinition
oPasteCmd = ThisApplication.CommandManager.ControlDefinitions.Item("AppPasteCmd")
oPasteCmd.Execute

If oTargetSheet.Size = 9997 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A4 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9997 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A4 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9996 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A3 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9996 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A3 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9995 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A2 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9995 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A2 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9994 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A1 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9994 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A1 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9993 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A0 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9993 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A0 POZIOMO"
ThisApplication.ActiveView.Fit
End If

Dim oNOWYDoc As DrawingDocument:  oNOWYDoc = oTargetDoc
Dim WLASCNOWEGO As PropertySet
WLASCNOWEGO = oNOWYDoc.PropertySets.Item("Inventor User Defined Properties")
WLASCNOWEGO.Item("NAZWA").Value = Nazwa_rys

Arkusz=oNOWYDoc.Sheets.Item(1)

'aktualizacja danych
Dim oControlDef As ControlDefinition  = ThisApplication.CommandManager.ControlDefinitions.Item("UpdateCopiedModeliPropertiesCmd")

oControlDef.Execute2(True)


'REGUŁA DLA ZAPISU
If Arkusz.DrawingViews.Count <> 0 Then 
PNazwa=Arkusz.DrawingViews.Item(1).ReferencedFile.FullFileName
'MessageBox.Show(PNazwa, "Title")

Pozycja=InStrRev(PNazwa,"\", -1)
NazwaModelu=Right(PNazwa,Len(PNazwa)- Pozycja)
scieżkaRysunki = ThisDoc.WorkspacePath()& "\" & "Rysunki"
'MessageBox.Show(scieżkaRysunki, "scieżka")
	
	If (Not System.IO.Directory.Exists(scieżkaRysunki))Then
	System.IO.Directory.CreateDirectory(scieżkaRysunki)
	End If

NumerCzesci=iProperties.Value(NazwaModelu, "Project", "Part Number")
'MessageBox.Show(NumerCzesci, "Title")

Plik= "D:\Chandra\Autodesk Cases\Inventor\Sep-2019\15742647\"&scieżkaRysunki & "\" & NumerCzesci & ".idw"

'MessageBox.Show(Plik, "PLIK")

oDoc.Close(False)
On Error Resume Next'Goto ZAPISZ' 

oNOWYDoc.SaveAs(Plik, False)

oSheet = oNOWYDoc.ActiveSheet 

oSheet.HoleTables.Add(oNOWYDoc.ActiveSheet.DrawingViews.Item(1), oPt)

'REGUŁA DLA NAZWY RYSUNKU
iProperties.Value("Custom", "NAZWA")= iProperties.Value(NazwaModelu, "Project", "Part Number")
InventorVb.DocumentUpdate()


'If WLASCNOWEGO.Item("NAZWA").Value = ""
'TYTUL = InputBox("PODAJ NAZWĘ ELEMENTU", "NAZWA RYSUNKU", WLASCNOWEGO.Item("NAZWA").Value)
'WLASCNOWEGO.Item("NAZWA").Value= TYTUL
'InventorVb.DocumentUpdate()
'Else
'End If


'aktualizacja danych

oControlDef.Execute2(True)

i = GoExcel.FindRow("BOM.xls", "Arkusz1", "Numer części", "=", iProperties.Value("Project", "Part Number"))
iProperties.Value("Custom", "SZTUKI") = GoExcel.CurrentRowValue("ILOŚĆ")
InventorVb.DocumentUpdate()

'REGUŁA DLA NAZWY RYSUNKU
TYTUL = InputBox("PODAJ NAZWĘ ELEMENTU", "NAZWA RYSUNKU", iProperties.Value("Custom", "NAZWA"))
iProperties.Value("Custom", "NAZWA")= TYTUL
InventorVb.DocumentUpdate()


'aktualizacja danych

oControlDef.Execute2(True)
End If

Thanks and regards,

CHANDRA SHEKAR G
Developer Advocate
Autodesk Developer Network

ralfmja · ‎09-12-2019

@chandra.shekar.g - thanks but I find one problem !!!

For my better understanding - you add :

Dim oPt As Point2d 
oPt = ThisApplication.TransientGeometry.CreatePoint2d(oSheet.HoleTables.Item(1).Position.X,oSheet.HoleTables.Item(1).Position.Y )

For creating X,Y position of Hole Table

and :

oSheet = oNOWYDoc.ActiveSheet 

oSheet.HoleTables.Add(oNOWYDoc.ActiveSheet.DrawingViews.Item(1), oPt)

for add hole table to Drawing View 1 but in case when hole table is for the third, fourth drawing view this solution does not work.

Could you look at how to identify the view for which the hole table was prepared and copy it ??

In attachment you find example drawing.

Many thanks in advance,

Regards,

ralfmj

chandra.shekar.g · ‎09-13-2019

@ralfmja,

Try below code for any drawing view.

Dim oDoc As DrawingDocument
oDoc = ThisApplication.ActiveDocument 
Dim oSheet As Sheet
oSheet = oDoc.ActiveSheet
Dim invCustomPropertySet As PropertySet
invCustomPropertySet = oDoc.PropertySets.Item("Inventor User Defined Properties")
On Error Resume Next
    Dim NAZWAWL As String
    NAZWAWL = invCustomPropertySet.Item("NAZWA").Value
'MessageBox.Show(NAZWAWL, "Odczyt nazwy")
    If Err.Number <> 0 Then
        ' Failed to get the property, which means it doesn't exist
        ' so we'll create it.
        Call invCustomPropertySet.Add("", "NAZWA")
    Else
	End If
'MessageBox.Show(NAZWAWL, "Odczyt nazwy")
'odczyt wielkości arkusza
Dim Size As DrawingSheetSizeEnum
Size = oSheet.Size
'odczyt orientacji arkusza
Orient = oSheet.Orientation
'odczyt nazwy
If iProperties.Value("Summary", "Title")<> "" Then
Nazwa_rys = iProperties.Value("Summary", "Title")
Else 
	Nazwa_rys = NAZWAWL
End If

oDoc.SelectSet.Clear

' Select all drawing views
Dim oView As DrawingView
For Each oView In oDoc.ActiveSheet.DrawingViews
oDoc.SelectSet.Select(oView)
Next

Dim cnt As Integer
cnt = 0
Dim oPt As Point2d 
If oSheet.HoleTables.Count >= 1 Then
	For Each oView In oDoc.ActiveSheet.DrawingViews
		cnt = cnt + 1
		If oView Is oSheet.HoleTables.Item(1).ParentView Then
			Exit For
		End If
	Next	
	oPt = ThisApplication.TransientGeometry.CreatePoint2d(oSheet.HoleTables.Item(1).Position.X, oSheet.HoleTables.Item(1).Position.Y)

End If 

Dim oCopyCmd As ControlDefinition
oCopyCmd = ThisApplication.CommandManager.ControlDefinitions.Item("AppCopyCmd")

oCopyCmd.Execute

oDoc.SelectSet.Clear

Dim oTargetDoc As DrawingDocument
oTargetDoc = ThisApplication.Documents.Open("D:\Chandra\Autodesk Cases\Inventor\Sep-2019\15742647\SAMPLE\Standard.idw", True)
oTargetDoc.Activate

Dim oTargetSheet As Sheet
oTargetSheet = oTargetDoc.ActiveSheet

oTargetSheet.Size = Size
oTargetSheet.Orientation = Orient

Dim oPasteCmd As ControlDefinition
oPasteCmd = ThisApplication.CommandManager.ControlDefinitions.Item("AppPasteCmd")
oPasteCmd.Execute

If oTargetSheet.Size = 9997 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A4 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9997 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A4 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9996 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A3 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9996 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A3 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9995 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A2 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9995 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A2 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9994 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A1 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9994 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A1 POZIOMO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9993 And oTargetSheet.Orientation = 10243 Then
oTargetDoc.ActiveSheet.Name = "A0 PIONOWO"
ThisApplication.ActiveView.Fit
Else If oTargetSheet.Size = 9993 And oTargetSheet.Orientation = 10242 Then
oTargetDoc.ActiveSheet.Name = "A0 POZIOMO"
ThisApplication.ActiveView.Fit
End If

Dim oNOWYDoc As DrawingDocument:  oNOWYDoc = oTargetDoc
Dim WLASCNOWEGO As PropertySet
WLASCNOWEGO = oNOWYDoc.PropertySets.Item("Inventor User Defined Properties")
WLASCNOWEGO.Item("NAZWA").Value = Nazwa_rys

Arkusz=oNOWYDoc.Sheets.Item(1)

'aktualizacja danych
Dim oControlDef As ControlDefinition  = ThisApplication.CommandManager.ControlDefinitions.Item("UpdateCopiedModeliPropertiesCmd")

oControlDef.Execute2(True)


'REGUŁA DLA ZAPISU
If Arkusz.DrawingViews.Count <> 0 Then 
PNazwa=Arkusz.DrawingViews.Item(1).ReferencedFile.FullFileName
'MessageBox.Show(PNazwa, "Title")

Pozycja=InStrRev(PNazwa,"\", -1)
NazwaModelu=Right(PNazwa,Len(PNazwa)- Pozycja)
scieżkaRysunki = ThisDoc.WorkspacePath()& "\" & "Rysunki"
'MessageBox.Show(scieżkaRysunki, "scieżka")
	
	If (Not System.IO.Directory.Exists(scieżkaRysunki))Then
	System.IO.Directory.CreateDirectory(scieżkaRysunki)
	End If

NumerCzesci=iProperties.Value(NazwaModelu, "Project", "Part Number")
'MessageBox.Show(NumerCzesci, "Title")

Plik= "D:\Chandra\Autodesk Cases\Inventor\Sep-2019\15742647\"&scieżkaRysunki & "\" & NumerCzesci & ".idw"

'MessageBox.Show(Plik, "PLIK")

oDoc.Close(False)
On Error Resume Next'Goto ZAPISZ' 

oNOWYDoc.SaveAs(Plik, False)

oSheet = oNOWYDoc.ActiveSheet 

If cnt > 0 Then
	oSheet.HoleTables.Add(oNOWYDoc.ActiveSheet.DrawingViews.Item(cnt), oPt)
End If


'REGUŁA DLA NAZWY RYSUNKU
iProperties.Value("Custom", "NAZWA")= iProperties.Value(NazwaModelu, "Project", "Part Number")
InventorVb.DocumentUpdate()


'If WLASCNOWEGO.Item("NAZWA").Value = ""
'TYTUL = InputBox("PODAJ NAZWĘ ELEMENTU", "NAZWA RYSUNKU", WLASCNOWEGO.Item("NAZWA").Value)
'WLASCNOWEGO.Item("NAZWA").Value= TYTUL
'InventorVb.DocumentUpdate()
'Else
'End If


'aktualizacja danych

oControlDef.Execute2(True)

i = GoExcel.FindRow("BOM.xls", "Arkusz1", "Numer części", "=", iProperties.Value("Project", "Part Number"))
iProperties.Value("Custom", "SZTUKI") = GoExcel.CurrentRowValue("ILOŚĆ")
InventorVb.DocumentUpdate()

'REGUŁA DLA NAZWY RYSUNKU
TYTUL = InputBox("PODAJ NAZWĘ ELEMENTU", "NAZWA RYSUNKU", iProperties.Value("Custom", "NAZWA"))
iProperties.Value("Custom", "NAZWA")= TYTUL
InventorVb.DocumentUpdate()


'aktualizacja danych

oControlDef.Execute2(True)
End If

Thanks and regards,

CHANDRA SHEKAR G
Developer Advocate
Autodesk Developer Network

ralfmja · ‎09-13-2019

@chandra.shekar.g - thank you very much !!

Thanks for your time which you wasted on it.

Work like I wished.

Regards,

ralfmj

ralfmja · ‎09-23-2019

Hi @chandra.shekar.g ,

I still wanted to return to the topic related to this rule.

I would like to copy additional custom iproperities (if they exist). All or - if it's easier - like on picture below:

Is it possible and possibly how do I put this in my code ??

Thanks in advance,

Regards,

ralfmj

chandra.shekar.g · ‎09-24-2019

@ralfmja,

Do you want to copy from Model document to Drawing document or vice versa?

Thanks and regards,

CHANDRA SHEKAR G
Developer Advocate
Autodesk Developer Network

ralfmja · ‎09-24-2019

Hi @chandra.shekar.g ,

I would like to copy the properties from the old drawing to the new one.

Iproperities which you can see on picture it's a "old drawing" properties. You can see it on example file 🙂

Thanks in advance,

Regards,

ralfmj

chandra.shekar.g · ‎09-25-2019

@ralfmja,

Actually, all custom iProperties are copied while creating new drawing with Standard.idw template. Please check the same.

Thanks and regards,

CHANDRA SHEKAR G
Developer Advocate
Autodesk Developer Network

ralfmja · ‎09-25-2019

Hi @chandra.shekar.g ,

You are right - I asked the wrong question. 😐

I meant not copying the properties themselves but their values.

I apologize for this - do you understand what I mean now ?

Can you help with that??

Thanks in advance,

Cheers,

ralfmj

chandra.shekar.g · ‎09-26-2019

@ralfmja,

It is observed that values of iProperties are also copied to new drawing.

Thanks and regards,

CHANDRA SHEKAR G
Developer Advocate
Autodesk Developer Network

ralfmja · ‎09-26-2019

@chandra.shekar.g

Unfortunately no 😉

Please look on gif and sample part.

Thanks in advance,

Regards,

ralfmj

ralfmja · ‎10-02-2019

Hi @chandra.shekar.g ,

Did you find some time to look at this ??

Thanks,

Cheers,

ralfmj

Hole table add on drawing with existing origin indicator by rule

Hole table add on drawing with existing origin indicator by rule

Forums Links

Post to forums