Troubleshooting Display Issues with Autodesk Inventor 2024 on 4K Monitor

[rfsebastian]

I'm working with Autodesk Inventor 2024 using a Samsung M7 4K monitor at a resolution of 3840 x 2160 pixels, changing the text size to 200%.

I have changed the application's DPI settings and the workspace, it looks small but sharp.

I have two problems:

1.- When I open the program, the window does not maximize completely. As seen in the attached image, two logos appear.

When I minimize and then maximize the program again, the screen appears cut off (see attached image).

2.- In the 2D drawing section, the commands are not fully visible.

Please, if anyone has experienced the same issue, could you comment on how you resolved it?

Thank you very much.

[rfsebastian]

I'm working with Autodesk Inventor 2024 using a Samsung M7 4K monitor at a resolution of 3840 x 2160 pixels, changing the text size to 200%.

I have changed the application's DPI settings and the workspace, it looks small but sharp.

I have two problems:

1.- When I open the program, the window does not maximize completely. As seen in the attached image, two logos appear.

When I minimize and then maximize the program again, the screen appears cut off (see attached image).

2.- In the 2D drawing section, the commands are not fully visible.

Please, if anyone has experienced the same issue, could you comment on how you resolved it?

Thank you very much.

[foreverkmsjeh]

Although the text becomes smaller, increasing the magnification is not recommended in my experience.
There are times when I have presbyopia and it is difficult to look at the screen. However, it is much more stable to use at 100% magnification.
It would be nice if the problem was resolved by changing the magnification to 100%, and changing to a QHD or FHD monitor would be helpful.

[foreverkmsjeh]

Although the text becomes smaller, increasing the magnification is not recommended in my experience.
There are times when I have presbyopia and it is difficult to look at the screen. However, it is much more stable to use at 100% magnification.
It would be nice if the problem was resolved by changing the magnification to 100%, and changing to a QHD or FHD monitor would be helpful.

[rfsebastian]

Thank you for replying, I am also working with a 27-inch monitor in the office and the same thing happens to me, at 100% scaling. When I maximize the Autodesk Inventor window, it splits.

It also happens to me with AutoCAD.

[rfsebastian]

Thank you for replying, I am also working with a 27-inch monitor in the office and the same thing happens to me, at 100% scaling. When I maximize the Autodesk Inventor window, it splits.

It also happens to me with AutoCAD.

[foreverkmsjeh]

I'm sorry I can't help you.

If both Inventor and CAD have the same symptoms, it may be a hardware problem rather than software.

If you attach the hardware specifications of your PC, other users on this forum may be able to suggest solutions.

[foreverkmsjeh]

I'm sorry I can't help you.

If both Inventor and CAD have the same symptoms, it may be a hardware problem rather than software.

If you attach the hardware specifications of your PC, other users on this forum may be able to suggest solutions.

[rfsebastian]

Good morning @foreverkmsjeh,

I am using two different computers and the same thing happens to me. I am unaware of the problem. I will continue to look for a solution.

Thank you very much for dedicating your time to solving the problem.

[rfsebastian]

Good morning @foreverkmsjeh,

I am using two different computers and the same thing happens to me. I am unaware of the problem. I will continue to look for a solution.

Thank you very much for dedicating your time to solving the problem.

[rfsebastian · Accepted solution]

Hi!

I'll answer my own question: for the program to work correctly, I had to set the monitor to "make this the main display".

That's how everything gets solved.

[rfsebastian · Accepted solution]

Hi!

I'll answer my own question: for the program to work correctly, I had to set the monitor to "make this the main display".

That's how everything gets solved.

[foreverkmsjeh]

OMG...I never thought that would be a problem.
Anyway, I'm glad it was resolved.

[foreverkmsjeh]

OMG...I never thought that would be a problem.
Anyway, I'm glad it was resolved.