Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
When I print some things on my ender 5 S1, some random layers are missing, causing gaps and separation within the print. I tried printing at a higher temperature and it slightly helped, but there are still missing layers showing up. Does anyone know what could be causing it/some could be some potential fixes? I attached a few pictures to describe my issue.
When I print some things on my ender 5 S1, some random layers are missing, causing gaps and separation within the print. I tried printing at a higher temperature and it slightly helped, but there are still missing layers showing up. Does anyone know what could be causing it/some could be some potential fixes? I attached a few pictures to describe my issue.
This isn't really a forum for 3D printing questions like these, but i'd start with checking for clogs in your nozzle, then filament feed (skipping), z-axis binding and the consistency of the filament diameter. It looks like a machine issue to me, not something to do with the 3D model or the sliced flile.
Hope you can get it fixed, good luck!
Niels van der Veer Inventor professional user & 3DS Max enthusiast Vault professional user/manager The Netherlands
This isn't really a forum for 3D printing questions like these, but i'd start with checking for clogs in your nozzle, then filament feed (skipping), z-axis binding and the consistency of the filament diameter. It looks like a machine issue to me, not something to do with the 3D model or the sliced flile.
Hope you can get it fixed, good luck!
Niels van der Veer Inventor professional user & 3DS Max enthusiast Vault professional user/manager The Netherlands
