Issue with changing the diameter of a hole using inventor

[dodoguardi]

Hi Everyone, 

I am relatively new to Autodesk products and I'm currently taking one of the inventor courses to learn more. In one module of the course I am required to change the hole diameter of a part. Unfortunately, I have encountered an issue with this step. When changing the diameter using the direct edit option I am prompted with a message stating "Dependent modeling failed. Try editing or delete feature." I have attached an image of this error message below. 

How can I fix this error and change the diameter of the hole?

Here is the link to the course module for background: https://www.autodesk.com/certification/learn/course/inventor-3d-modeling-mechanical-design-professio... 

[Alexander_Chernikov]

Hi,  It would be easier to find the error if you attached the part file itself.

Also indicate the version of the program and installed updates.

[WHolzwarth]

Here's the file. I could edit it with Inventor 2023.2 without problems.

[BDCollett]

It looks like you may be using the wrong operation with direct edit to change the diameter.

[JDMather]

[Alexander_Chernikov]

Hi, in the added screenshot there is letter "D" - as a diameter changing.
The problem may be due to the lack of installed updates - for version 2021 it should be 2021.4.4

[dodoguardi]

Hi Alexander! Here is the part file as well as the screengrab of the Autodesk inventor version I am using. I checked for updates but none were found. Not sure where to go from here. 

 

[Alexander_Chernikov · Accepted solution]

Hi, for the version 2023 should be ServicePack 2 - you can find it at
https://manage.autodesk.com/products/updates

or

https://manage.autodesk.com/products/INVPROSA?version=2023&platform=WIN64&language=EINT