Create loft

[davorxxx]

How do I get an elbow made correctly. Three are different elbow when I make a loft I don't like any of them. I would like it to be on the line as in sketch 1 and sketch 3.

[-niels-]

Can you use those sketches as guiderails for you loft?

[Thomas_Savage]

Hello @davorxxx 

Can you attach part 21,22,23 please.

As with just the assembly they are unresolved, so can't see the part to solve the issue.

Thanks,

[bhavik4244]

@davorxxx 

you have missed attaching the part! However, with a snap, I merely got your concern and made the concept that could help you.

I have attached a part here that might solve your issue and give you the right way to model it out.

[davorxxx]

I can't open your ipt.file, just the image, and in the image I see that the dimensions have changed. I need the dimensions exactly as I specified them.

[bhavik4244 · Accepted solution]

@davorxxx 

Here you go 🙂

[johnsonshiue]

Hi! I suspect you could use Guide Rail Sweep. Basically, use the center rail as the Sweep Rail and use the outer rail as the Guide Rail. It should give you the precise geometry.

Many thanks!