Hi!
I am practicing in using dimensions.
For this purpose I use spline
3 more dimensions are required
I use degrees of freedom, but I still don't understand what are the additional dimensions.
Is there any algorithm for defining required dimensions?
Thanks!
the file is attached
Hi Shiva,
you can help yourself just moving your sketch.
Here the 3 missing dimensions.
Admaiora
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I didn't open your part but from the image it appears your spline is floating in space. Meaning there's no dimension from the origin (that's 2 of the dimensions its looking for). This was pointed out to you in another posting you had about required dimensions. Not sure what you're trying to accomplish here but sometimes you don't need a fully constrained sketch.
For example... I have this revolved sketch.. My main geometry is dimensioned by my geometry representing the centerline (axis of revolution) is not, So I will always have 1 dimension needed but in this case I don't care how long the line is for the center line. But as always I started my sketch using the origin.
Mark Lancaster
& Autodesk Services MarketPlace Provider
Autodesk Inventor Certified Professional & not an Autodesk Employee
Likes is much appreciated if the information I have shared is helpful to you and/or others
Did this resolve your issue? Please accept it "As a Solution" so others may benefit from it.
