HSM Post Processor Ideas

Anonymous · ‎08-10-2016

We need a post for WY100 Nakamura. Twin turret, both have Y axis and sub spindle! Lets get this going Al 🙂 Thank you!

area419jon · ‎02-14-2017

I saw a video the other day for a Makino I think which had a drill cycle that, instead of moving straight up then straight over, it "arced" out of the hole to the next hole. I feel like this is something that would be doable in HSM and wondered if anyone had ever suggeted it before? It wouldnt have to be just for drill cycles, really anything could benefit from it. I have a program that drills 50 holes in a plate, then comes in and bores them with an endmill, then chamfers the rims. I feel like gobs of time could be saved by having one fluid motion from one hole to the next. Only thing I would suggest is using true arcs instead of points along the way so that non-high speed look ahead machines can benefit from it as well. Thanks!

al.whatmough · ‎02-16-2017

Gauging interest for Baileigh Waterjet post

vinynstar · ‎11-24-2016

ADD Macro table like in Catia V5 to be able to do move after/before in operation or PATTERN and even better between Pattern behavior maybe add this option in the toolpath menu and in the pattern menu, one tab for before and after and one tab for between instances ADD as well, a manual entry programming box that would act like a toolpath (ex:contour) in the tree... Example in V5 for macro:

Anonymous · ‎10-03-2017

Hallo. You can crate postprocessor fot turn/mill okuma l200e-m with axis z,x,c

Anonymous · ‎10-01-2017

Is it possible to get a post processor for the laguna IQ pro automatic tool change model thanks heaps

Anonymous · ‎06-06-2017

I request that AutodeskHSM has sample posts for FANUC, OSP and MAZAK. Autodesk stuff introduced sample posts. But almost of all is for Haas. If Autodesk stuff tells me to modify them and to make posts for FANUC, OSP and MAZAK, it is too difficult to do. Now I supply the Mill/Turn customer two posts which are 5 axis Mill post and Turning post. But in this case, the customer can’t gnerate one NC data with Mill and Turning tool paths. I request that AutodeskHSM has sample posts for FANUC, OSP and MAZAK as same as 3 axis.

Anonymous · ‎01-03-2017

When a manual NC procedure is saved in a template, as in a M0 program stop code, and then used in a new file it isn't posted in the new program unless you remember to regenerate it. It's an easy thing to forget because there's no red X or indicator of any sort that it needs to be generated and unless you look through the code of new posted file, you wouldn't catch that it hadn't been included.

Community

Stock Nakamura WY100 Post

Arcing "Rapid" Movements

Baileigh Waterjet

ADD Macro for entry/exit and pattern

postprocessor fot turn/mill okuma l200e-m

Post Processor with tool change

I request that AutodeskHSM has sample posts for FANUC, OSP and MAZAK.

Not needing to remember to regenerate a manual NC procedure when used in templat

Forums Links