Community

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
HSM Post Processor Ideas
Share ideas for future product features directly with the HSM Post Processor team and collaborate on existing suggestions with your peers.
Submit Idea
Back to HSM Forums Category
Submitted by Anonymous on ‎05-24-2021 10:58 PM Submitted on ‎05-24-2021 10:58 PM Status: Gathering Support

Post processor for CTX alpha 300 control siemens 840d sl

I have the post processor "siemens mill-turn r42995" installed. It should be used for my Sinumerik (Siemens 840d sl) on a CNC CTX Alpha 300 (5-axis) machine.   But unfortunately the G-code output is not good enough.   The machine does not support some terms: e.g. M6; M8 or D0. Does anyone have an already adapted PP? Or can I help how I have to adapt the PP so that it runs without problems on my machine?   Show More
Report
0 Votes
Vote
1 Comment (1 New)
POST A COMMENT
Submitted by Anonymous on ‎05-22-2021 01:15 PM Submitted on ‎05-22-2021 01:15 PM Status: Gathering Support

OKUMA OSP 7000L post processor

Hi,    Having and older OKUMA lathe I need a post processor for a OKUMA OSP 7000L. Where do I get this if possible. The only OKUMA post processor available trough Fusion 360 is too generic and I have to correct G-codes to the correct for the machine.   Regards Benjamin Show More
Report
0 Votes
Vote
1 Comment (1 New)
POST A COMMENT
rusty.bird
Submitted by Advocate on ‎05-18-2021 08:37 AM Submitted on ‎05-18-2021 08:37 AM Status: Gathering Support

Support for Heidenhain cycle 225 (Engraving Cycle) in the post

It would be very handy to add TNC 640 cycle 225 (Engraving cycle) support to the heidenhain post. If this could be done the operator could change part engraving numbers without the programmer having too adjust the engraving on already programmed parts. Show More
Report
0 Votes
Vote
POST A COMMENT
POST A COMMENT
longnGVA5S
Submitted by Observer on ‎05-07-2021 10:59 AM Submitted on ‎05-07-2021 10:59 AM Status: Gathering Support

post processor for hyundai wia f 500 control fanuc 31i model A5

can i have the post for post processor for hyundai wia f 500 control fanuc 31i model A5 Show More
Report
0 Votes
Vote
POST A COMMENT
POST A COMMENT
Submitted by Anonymous on ‎04-28-2021 08:00 AM Submitted on ‎04-28-2021 08:00 AM Status: Gathering Support

Post for a Doosan Puma SMX 2600 ST

Need a post for a Doosan Puma SMX 2600 ST. With 31i-B5 Fanuc control. 9 axis, lower turret with live tooling, upper milling head. Show More
Report
0 Votes
Vote
POST A COMMENT
POST A COMMENT
Submitted by Anonymous on ‎04-28-2021 01:58 AM Submitted on ‎04-28-2021 01:58 AM Status: Gathering Support

Post processor for 2 path control

A post processor for a Nakamura WT250 ii with two path control Show More
Report
0 Votes
Vote
POST A COMMENT
POST A COMMENT
LorenzoDerbez
Submitted by Participant on ‎03-23-2021 09:47 AM Submitted on ‎03-23-2021 09:47 AM Status: Gathering Support

Haas SL-30 post processor for older haas lathes (2005)

It would be very helpfull to have a post processor for older (2005) Haas SL-30 lathes so we dont need to change manually the code for the live tooling.  Show More
Report
0 Votes
Vote
1 Comment (1 New)
POST A COMMENT
Submitted by Anonymous on ‎03-15-2021 10:01 AM Submitted on ‎03-15-2021 10:01 AM Status: Gathering Support

Thermwood Model C40 3 axis Router

Need a post processor Show More
Report
0 Votes
Vote
POST A COMMENT
POST A COMMENT
serge.quiblier
Submitted by Autodesk on ‎02-12-2021 08:49 AM Submitted on ‎02-12-2021 08:49 AM Status: Gathering Support

SBC router

We are working on a generic post processor for the SBC router. We would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor and provide any feedback you might have. You can download it from the following link. https://cam.autodesk.com/posts?p=sbc Show More
Report
0 Votes
Vote
4 Comments (4 New)
POST A COMMENT
serge.quiblier
Submitted by Autodesk on ‎02-12-2021 08:42 AM Submitted on ‎02-12-2021 08:42 AM Status: Gathering Support

Power Automation

We are working on a generic post processor for the Power Automation milling controller. We would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor and provide any feedback you might have. You can download it from the following link. https://cam.autodesk.com/posts?p=power_automation Show More
Report
0 Votes
Vote
POST A COMMENT
POST A COMMENT
Submitted by Anonymous on ‎02-12-2021 06:02 AM Submitted on ‎02-12-2021 06:02 AM Status: Gathering Support

Post-procedural research

Hello, I'm looking for a post processor for : Machining center HELLER B Z V 07 2000 Serial number: 22 41603 00 Races: X2000 Y560 Z500 Order: NC UNI PRO 80 Here is the programming manual for the machine provided by the seller (excuse my English, I have all translated with a translator) Thank you for your time Yours sincerely   Show More
Report
0 Votes
Vote
POST A COMMENT
POST A COMMENT
Report a website issue