SBC router

[serge.quiblier]

We are working on a generic post processor for the SBC router. We would be happy to get some feedback from you before we put it into production. Feel free to download and test this post processor and provide any feedback you might have. You can download it from the following link. https://cam.autodesk.com/posts?p=sbc

[renault.gregory.72]

Thank you Serge,

1. My SBC is New and the CNC controller is a Bechkoff CNC controller. Do you think the post pro you are proposing can work with it ?

[serge.quiblier]

Hi @renault.gregory.72 

I am not completly sure.

I remember creating a post for the Beckhoff variant, but I don't remember for which software (FeatureCAM or Fusion).

Let me check and give you an update.

The post advertised here is for the Power Automation PA8000 controller, with SBC specific commands and variables usage.

[renault.gregory.72]

Ok my CNC has a Bechkoff CNC LW800

I will stand for your update 

[guillaumethenon]

Hi Serge,

Thanks for your message and post. My SBC machine is equiped with a PA8000NC and should therefore fit with your post but unfortunatly I checked it with SBC last week and they could not understand or find what my machine needs. Is there any way we can communicate on your post and test it on my machine ? Do you know someone obviously in France running it ?

Hoping to hearing from you and kind regards,

Guillaume