Hello,
As you can see in the picture, every extrusion I make is multiplied no matter what. How can I fix it?
Randomly multiplying every extrusion
You probably need to share your design as an f3d so we can take a look. Best guess would be you have 3 instances of a component. As all the components will be identical adding an extrusion to one adds it to the others.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
I'm not sure what's going on. Even though the main component is active, as soon as you create an extrude a different component becomes active. Looking at your design timeline I have to tell you it's a complete mess and I'm not suppressed Fusion's getting confused. Some pointers, fix all warnings and errors in the timeline. If you have a move in the timeline you're probably doing something wrong, if you have a capture position in the timeline you're probably doing something wrong, same goes for remove. I don't know if you'll be able to fix the problems now because you have so many. Look at Rule #1 and start again would be my advice and ask questions before getting too far.
Mark Hughes
Owner, Hughes Tooling
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
