Multi part hole making

[BillGEGHV]

Hi All, 

This is a pretty newbie question even though Ive been using Fusion for quite some time, I still have not figured out if there is a better method of creating holes in multiple objects at the same time.  

As you see in my screenshot I want to create a hole operation that goes through both objects in a single command, in the front (black) part I need a clearance hole with a countersink.  Then on the gray part, I simply want a tap hole size.  Simple, basic, standard stuff we do all day long in Fusion.  BUT I want to know if you can do this in a single command. Place a simple clearance hole, counter sink hole, OR counterboar hole, on part # 1,  then a tap hole in the other part BUT all in one command.  Can you do this??  Or do you need to work with one body at at time? 

[jhackney1972]

You cannot do what you desire in ONE command.  You can used the same hole center point to create what you are looking for in multiple commands.

[BillGEGHV]

Thanks for confirmation.  This should be added to the wishlist, it's a PIA to do in 2 commands IMHO, but I see why they do it this way since you're adding features to 2 components.  But they could figure out a way around that, this is SO basic and a thing we to ALL the time.  IS there an active wishlist?