Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Have just tested opening the Tool Library on 3 computers here with versions 2.0.11680, 2.0.11684 and 2.0.11685 and have no issues.
All three computers are "stand alone" and each has it`s own Internet access although they are usually used in "offline" mode but were connected online for the test 🙂
Are your 3 work stations on a local network to a server on your premises ? If so then this could be where the issue is located, have you tried connecting one of them direct to the Internet and checking if the issue is still present ??
Fusion
