Talk shop with the Fusion (formerly Fusion 360) Manufacture Community. Share tool strategies, tips, get advice and solve problems together with the best minds in the industry.
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
As a Building Manufacturer, I have been using Fusion 360 for a few fears now, but as far as sending nests to router, I am using a different software. Exporting .STP files to the nesting software. recently I have started thinking about switching over to Fusion with nesting and applying CAMs. however, I can't find a 5-axis post processer for .CIX files. the file I did find is only capable for 3-axis. is there any place I can find one for a head xyzca machine? Attached is a file I would like to have duplicated.
As a Building Manufacturer, I have been using Fusion 360 for a few fears now, but as far as sending nests to router, I am using a different software. Exporting .STP files to the nesting software. recently I have started thinking about switching over to Fusion with nesting and applying CAMs. however, I can't find a 5-axis post processer for .CIX files. the file I did find is only capable for 3-axis. is there any place I can find one for a head xyzca machine? Attached is a file I would like to have duplicated.
Fusion
