4th Axis cut off stock hassle

[macmanpb]

Hi,

i machine a part on my 4th axis and when it's finish i want to cut off the the part from stock.

But i am found no way to do that. I tried 2d contour, flow, swarf and all im beta mode too.

The most promising operation was 2d contour with wrapping mode. But it seems it is not possible to select a circle to wrap. It is always red and dashed.

 

Here is an example for the cut off position.

What can i do to get this done? Have i failed to see anything?

Here is the file: https://a360.co/2AS0aoI

[Marco.Takx]

Hi @macmanpb,

I did a quick look and have a maybe a solution for you.

https://a360.co/2xbcT0K

If my post answers your question Please use  .Accept as Solution & Kudos This helps everyone find answers more quickly!

[macmanpb]

Hi @Marco.Takx,

First, thank you for the quick reply and your work 

If i see it right, you have created a pocket and machine these. That could be a solution for now.

I am curios about to see if there other workflows out there to get this done.

[Marco.Takx · Accepted solution]

Hi @macmanpb,

Couldn't let it to try more things.

I've now an open loop 2D Contour operation based on a split surface that I give some extension on the end.

https://a360.co/2QwJuXU

If my post answers your question Please use  .Accept as Solution & Kudos This helps everyone find answers more quickly!

[macmanpb]

You are addicted to wrap 

Seriously, a smart next approach, thank you for that!

[macmanpb]

@Marco.Takx help's me a lot to get my things done with that work arounds.

But is there no native way to do that?