How to make curved lines on 3d model

[mike_vos]

Hello,

I need to make a curved pocket in a 3d model. Anybody that can help me how to make this?

Thanks in advance 

Mike Vos

[TheCADWhisperer]

@mike_vos 

If this were my design, I would start by adding geometry constraints and dimensions in the sketch.

[TrippyLighting]

I wonder how you created the sketch in that design. Did you import that from a dxf, or svg file?

The sketches are not properly dimensioned and under constrained. I'd fix that before proceeding.

The screencast shows one way to accomplish what you are asking for:

[johnsonshiue]

Hi! The big rounded face on the imported body has a G0 edge. It does not seem reasonable. I have recreated it using a fillet with the same radius. Then I used Emboss command and Full Round Fillet to create the groove easily. Please take a look.

Many thanks!

[mike_vos]

Thanks ! i will try these options. I did import this as a DXF from the customer. 

[g-andresen]

Hi,

another solution

günther