I need two plate mould with stripper ejection help me please u may understand my intention .
Please....
Help with this part
You will need to attach your model. If you do not know how to attach your Fusion 360 follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save to your hard drive. Then use the Attachments section of a forum post to attach it.
John Hackney, Retired
Did you find this post helpful? Feel free to Like this post.
Did your question get successfully answered? Then click on the ACCEPT SOLUTION button.
@FacebookGroupMember wrote:I need two plate mould
I would probably add some draft (release angle) to the original part.
Of course you will need to show what you have done so far to get additional help.
Can you ask your instructor to join this discussion?
Why yes, I can help you with that.
Can you ask your instructor to join this discussion?
That is not a CAD format file?
That is the same image that you posted originally.
I need to see the CAD file of your work.
I have already modeled it myself, but I passed this class a longgg time ago...
Accepted solution
Has your instructor taught how to use Fusion 360?
Sketch1 does not have any dimensions?
There is (almost) never any need to use a Move command.
Sketch2 is empty?
Shell done at the wrong time (before Fillets).
Sketch3 is empty?
Sketch4 does not have any dimensions?
Sketch5 is not fully defined?
Another unnecessary Move?
An incorrect Fillet that results in very thin corners?
...and doesn't match the drawing?
There is no radius
