HELP! with modeling on fillet

[Anonymous]

Hello, 

I am a beginner at modeling and am trying to connect the line from one plane to model onto a fillet which is at an angle . Is this possible? 

I will like the extruded lines and dots to connect across the fillet portion to the top and over to the other side

[g-andresen]

Hi,

try this way:
1. Cut & Mirror

To close the gap you have to create a sketch and project the cut out into. Then the corresponding part is extruded into the existing gap.

2. maybe pattern on path is the tool for part 2

günther

[Anonymous]

my issue is more so the fillet portion of the slide. I will like to sketch the engrave lines on the side in the fillet portion as well 

[g-andresen · Accepted solution]

Hi,

no problem:

Sweep is your friend.

Screencast

günther

[Anonymous]

That's awesome thanks a million! Now will that work for the small circles on the side as well?

[g-andresen]

Hi,

I hope, that´s what you´re after.

Important:

günther

[Anonymous · Accepted solution]

Yes this is what I wanted, if you don't mind telling me how you got this done for future projects

[g-andresen]

Hi,

The path for the pattern was set in article 4.

Take a look at the screencast and the timeline.
The path is used for both patterns, which can be seen in # 6 (screencast & file).

günther