Help with 90° loft with different diameters

[Anonymous]

Hi, I am having an issue with creating a 90° loft when the diameters are different.

The ending result is either unrealistic or  has auto-insertecting geometries that I can't subtract/join.

I just want a result that would happen if you would try to bend a metal rod..

This is the best I could do, which I am not satisfied with as the intersection is weird.

ANy tips on how to make it? Thank you.

[TheCADWhisperer]

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

[Anonymous]

I'm not sure what it would be useful for, it's just a generic question for any 90° loft with different diameters..

[laughingcreek]

it would help people directly answer your question without having to create an example model from scratch. 

[laughingcreek]

this is probably as realistic as your going to get, but probably not worth the trouble.

[Anonymous]

Oh, I never saw those modeling features.... so I guess there is no way with loft? Because I do 90° features with different diameters very often and it's hard.

[jhackney1972]

I guess I will throw one into the pot to be considered.  Model is attached.

[TheCADWhisperer]

---

@Anonymous wrote:

I do 90° features with different diameters very often and it's hard.

---

No example file Attached?

[shahriarsifat1802164]

Hi,
Can you please share your model?
Thank you.

[shahriarsifat1802164]

[shahriarsifat1802164]

[shahriarsifat1802164]

I am providing a screencast please have patience.

Thank you.

[shahriarsifat1802164]

Loft with 90 degree angle | Fusion 360 | Autodesk Knowledge Network