Help filx dxf cutting text!

[malinen89]

hi can someone help me fix this dxf file. there are problems with some of the letters 😞

[g-andresen]

Hi,

What is a mistake from your point of view?

I can't see one.

günther

[malinen89]

here you see the problem 😃

[g-andresen]

Hi,

here´s a f3d file

günther

[jhackney1972]

I am with @g-andresen, the DXF opens in both Fusion 360 and AutoCAD 2023 without issue and is complete.  What application are you seeing the issue?

[malinen89]

Hi thanks for the reply. the problem occurs when i import the dxf file into my nest program. EasyNest pro. You can see in the picture I uploaded earlier. It seems that the lines do not sit together where there is a radius.

[g-andresen · Accepted solution]

Hi,

The problem probably lies in the amount of control points of individual elements.
I have reduced them in V-Carve-Pro.

günther

[malinen89]

Okay now it works thanks !. What did you do and why do you have to do that? 😃

[g-andresen]

Hi,

---

@malinen89  schrieb:
Okay now it works thanks !. What did you do and why do you have to do that? 😃

---

The upper curve consists of a large set of (very short) line segments. If these segments do not have a "harmonic" transition, it can cause interference in further processing.
I converted the contours to paths with simultaneous change of resolution.

günther

[malinen89]

Okay, I think I understand. I will try to learn this. But if you want you can help me with this hehe 😃

[g-andresen]

Hi,

Here is a (hopefully) working variant.

günther

[malinen89]

The D and S dont work 😞

[g-andresen]

Hi,

try this version.

I have corrected some (apparently) critical areas by hand because numerous duplicate vectors could not be removed cleanly, which led to chaotic conditions when connecting them.

Screencast

günther