Datum Target Symbols

[rcollins50v]

Hi all,

I assume there are no datum target symbols (GD&T) available for use in Fusion? Are these on any roadmap for implementation?

[MoshiurRashid]

Obviously, there is Datum target symbols. The whole GD&D functionality is included in Fusion drawing.

Here is a picture of it.

[rcollins50v]

That is not a datum target symbol. That is a datum symbol. You can search for datum targets in 14.5 to see symbol and its use case.

[HyoCha]

That is also what I need.

This is Datum targets.

We really need this ASAP.

[Christian_56]

Dear Moshier Rashid

referring your answer in this  topic to a question from rcollnis50v @rcollins50v  from feb 2020 . He is right,  I also searching to this symbols. I find no  possibility  to  describe this fundamental issue in a technical drawing. For me point of view it is a technical standard  and a must  to have this symbol in the general  symbol library of form and positional tolerances.

It might no be a "rocket point" to implement this in a  professional program like FUSION 360 .

I would  be very glad to get an answer  form AUTODESK. Thanks a lot

Christian from Germany

[fredrik.lotto]

What is the latest status of this feature? (Round datum targets)

It's still not available and a really basic function when it comes to GD&T. 

Examples can be found in ISO 5459

We need it asap. Is there a known "fusion-workaround"?

[marcelo_mehlberg]

Is there any news related to that? I also need to add Datum targets and as far as I have noticed there is still not implemented...

[jlarsonLP454]

I need this too. Fusion should support ALL the ASME drawing standard symbols...

[johnpgerrity]

This would be greatly appreciated! Please add it to the drawing tools! Thanks!

[marc_potvin7TDK8]

Same for me. I hope datum targets as per ASME Y14.5 and ISO will be implemented soon...