Cant generate drawings

[Anonymous]

Hi all,

Somehow, today Fusion360 did not let me get inside. (Windows desktop version)

Uninstalled the software, and re-installed. I was able to get inside and see my project.

Tried to create a drawing from a design and it did not let me  do it. (Image attached with the pop up window)

[ryan.bales]

Can you verify what version of Fusion you are running?

[Anonymous]

Hi Ryan,

Thank you for helping out.

I am running 2.0.4279

---

---

[cmiller66 · Accepted solution]

Hi Juan,

Are you still encountering this issue?  If so here are a few suggestions/things to try:

1.  Close Fusion > Launch Task Manager > are there any Fusion or AcCoreConsole processes still running (or not responding)?  If so, End process.

2.  Reboot never hurts

3.  Re-launch Fusion > Try to open a drawing

4.  If that doesn't do it, repeat step 1 then open Windows Explorer and go to %LOCALAPPDATA%

5.  Go to folder Local\Autodesk\Autodesk Fusion 360 and rename the folder AcCore (can be just AcCore_BAK)

6.  Relaunch Fusion and try again.

Please let me know how it goes.  We had a number of startup problems fairly recently but this is the first I've heard of the problem returning since the last update.

Thanks,
Chris

[Anonymous]

Thank you cmiller66;

Seems to be working now.

Your input is highly appreciated.

[Anonymous]

Same problem i m facing, and getting this message again and again.

i tried the steps shown 3 to 4 times still with no results.
i also edit AcCore. still not working

please see to it

thank you!

[cmiller66]

Hi Harshul,

This sounds like the Windows Update issue discussed here: https://forums.autodesk.com/t5/fusion-360-support/2d-drawing-not-opening/td-p/8219894.

Can you try Fenton's solution towards the bottom of that thread and see if that addresses the problem?

Thanks,
Chris